Showing all 11 results

  • Arduino Nano 328 Board CH340

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P . It has more or less the same functionality of the Arduino Duemilanove, but in a different package.it works with a Mini-B USB cable instead of a standard one.

    Rs.185.00 Add to cart
  • Arduino Nano 328 Board Soldered CH340

    Arduino Nano 328 Board Soldered CH340

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P . It has more or less the same functionality of the Arduino Duemilanove, but in a different package.it works with a Mini-B USB cable instead of a standard one.

    Rs.195.00 Add to cart
  • Arduino Pro Mini ATMEGA328P 3.3V/8MHz

    Arduino Pro Mini ATMEGA328P 3.3V/8MHz

    The Pro Mini is a microcontroller board based on the ATmega328 for Arduino. With 14 digital input / output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. Six pin header can be connected to an FTDI cable to provide USB power and communication to the board.

    Rs.175.00 Read more
  • Digispark ATTiny85 USB Development Board Digistump

    • 100% Brand New and High Build Quality
    • The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.
    • The Digispark is shipped fully assembled except for the two included and easy to solder headers.
    Rs.120.00 Add to cart
  • Sale!

    ESP 01 / ESP8266 Programmer CH340G Chip USB WiFi Wireless UART GPIO0

    This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USb bus and and jumper (on the right of the 2x4P header) will help configuring the GPIO0 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.

    Rs.422.00 Rs.199.00 Add to cart
  • Sale!

    NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range

    The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!

    This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.

    This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.

    Rs.345.00 Rs.199.00 Add to cart
  • Sale!

    ST-Link V2 Mini STM8 STM32 Simulator Download Programmer

    The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

    • internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!
    • interface definition on the shell directly tagging, be clear at a glance, convenient and practical!
    • 5 V, 3.3 V available at the same time, convenient for you to link the 5 V and 3.3 V target board
    • shell characters using laser laser, laser engraving, never fade off! Permanent clear!
    • internal motherboard with 500 ma self recovery fuse, completely protect your expensive computer motherboard!
    • The LED indicator light, convenient you always observes the working state of the ST cc-link V2!
    • Distribution 4 with dupont line, let you can easily cope with different target plate line order!
    • Use anti-static bag packaging, automatic sealing machine sealed packaging, safe and reliable, does not fear the electrostatic, not afraid of water!

     

    Rs.325.00 Rs.249.00 Add to cart
  • Sale!

    STM32F103C8T6-ARM-STM32-Minimum-System-Development-Board

    This is STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board. This board is low cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6. Board is suitable for learners that want to learn STM32 microcontroller with ARM Coretex-M3 32-bit core.

    Rs.320.00 Rs.225.00 Add to cart
  • STM8S103F3P6 STM8 Minimum System Development Board

    STM8S core board of the highlights: The development board using MicroUSB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB MINI line-powered, USB MINI line is not easy to find, has been gradually phased out. Other manufacturers of products are used in MINI-USB port, this is not applicable for customers. Low price, user-friendly design, a full set of data, allowing you to save money, save time, effort, worry!

    Rs.110.00 Add to cart
  • usb asp

    USB ASP ISP Programmer for 8051

    USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed, and thats make it low cost USB programmer.

    The Programmer works on USB port and can be used with Laptops. Software is compatible with Windows Vista and Windows 7. High speed programming and does’t require external power.

    Rs.175.00 Add to cart
  • Sale!
    Wemos D1 Mini ESP8266

    Wemos D1 Mini ESP8266 WIFI board for Arduino IOT

    This is D1 mini, it is a mini WIFI board based on ESP-8266EX.

    11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire

    supported(except D0) 1 analog input(3.3V max input) a Micro USB connection

    Rs.420.00 Rs.237.00 Add to cart