- You cannot add "DS3231 Precise Real Time Clock Module I2C RTC AT24C32" to the cart because the product is out of stock.
Modules & Sensors
Showing 31–45 of 97 results
-
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors
0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
- this voltmeter uses three-position 0.36inch LED digital tube display, no shell, thin thickness, small appearance, low price, stable performance and good display.
- The measuring range of the voltmeter can be DC 0-100V. The working power supply should be supplied by the outside, the voltage range is DC 4.5-30V, and the protection will be received.
- The display resolution of this voltmeter is fixed to 0.1V.
- This voltmeter is suitable for users with DC power supply to save cost. Or you need to start measuring from 0V
SKU: n/a -
Developments Boards, Modules & Sensors
16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
Developments Boards, Modules & Sensors16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
• 8 pin connector
• Adhesive mounting
• Maximum Circuit Rating: 35VDC, 100mA
• Insulation Resistance: 100M Omh, 100V
• Dielectric Withstand: 250VRms (50-60Hz, 1min)
• Contact Bounce: <=5ms
• Life Expectancy: 1 million closures
• Operation Temperature: 0 to 70 centigrade
• Humidity: 40 centigrade, 90%-95%, 240 hours
• Pad Size (L x W): Approx. 3 x 2.7 inch / 76 x 69 mm
• Flexible Circuit Length: Approx. 3.3 inch / 83 mmSKU: CE-M032 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051 -
Batteries & Chargers, BMS, Circuits Boards & PCB, Modules & Sensors
2S 3A Li-ion Lithium Battery Charger 7.4v 8.4V Protection Board
Batteries & Chargers, BMS, Circuits Boards & PCB, Modules & Sensors2S 3A Li-ion Lithium Battery Charger 7.4v 8.4V Protection Board
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with the various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects.SKU: CE-M090 -
Circuits Boards & PCB, Modules & Sensors
4 channel Logic Level Converter Bi-Directional 5V to 3.3V
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.
SKU: CE-M050 -
Modules & Sensors, Motor Drives & controllers
4000W 220V SCR Voltage Regulator Adjust Speed Control Dimmer Thermostat
Modules & Sensors, Motor Drives & controllers4000W 220V SCR Voltage Regulator Adjust Speed Control Dimmer Thermostat
Adjustable Power Supply Board ,Connect this device with lamp or home appliance or electric circuit,then rotate the knob for dimming, speed, voltage, temperature control. It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect.
SKU: CE-M030 -
Modules & Sensors
5MP Camera Module Raspberry Pi3 Model B & Cable Rev 1.3
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or a CCTV project. The lightweight camera module allows for it to be used in more practical roles, such as a hidden camera or even a camera for a Pi-phone, for example.
This Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.The board itself is tiny, at around 25mm x 23mm x 8mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short flexible ribbon cable. The camera connects to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
SKU: CE-M0111 -
Modules & Sensors, Motor Drives & controllers
AC 220V 2000W SCR Voltage Regulator Dimming Dimmers Speed Controller Thermostat
Modules & Sensors, Motor Drives & controllersAC 220V 2000W SCR Voltage Regulator Dimming Dimmers Speed Controller Thermostat
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.As the power has very big,so the normal home appliances or small factories enough to use.This pressure regulator with two-way high power silicon controlled, potentiometer have nuts, can use not need add any components, very convenient and practical.Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.Applicable Appliance: Electric furnace, water heater, lamps, small motor, electric iron. etc
SKU: CE-M012 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062 -
Developments Boards, Modules & Sensors
Alcohol Sensor MQ3 Module for all MCU
This is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer.
SKU: CE-M095 -
Developments Boards, Modules & Sensors, Robots & Kits
APDS-9930 Non-contact proximity and Ambient Light sensor
Developments Boards, Modules & Sensors, Robots & KitsAPDS-9930 Non-contact proximity and Ambient Light sensor
APDS-9930 is a digital I2C compatible interface ambient light sensor (ALS) and proximity sensor with IR LED in a single 8-pin package. The ambient light sensor utilizes dual photodiodes to approximate the human eye response with a low lux performance at 0.01 lux. This high sensitivity allows for the device to operate behind a darkened glass. The proximity sensor is fully calibrated to detection of objects to 100 mm thus eliminating the need for factory calibration of the end equipment or sub-assembly. The proximity detection feature operates well from bright sunlight to dark rooms. The addition of the micro-optics lenses within the module, provide highly efficient transmission and reception of infrared energy which lowers overall power dissipation. In addition, an internal state machine provides the ability to put the device into a low power mode in between ALS and proximity measurements providing very low average power consumption.
SKU: CE-M088 -
-
Modules & Sensors
BMP280 Pressure Sensor Module High Precision Atmospheric
- Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
- This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
SKU: CE-M036