ESP32 Development Board WiFi+Bluetooth 30 pin
Out of stock
ESP32 Development board is based on the ESP WROOM32 WIFI + BLE Module.It’s a low-footprint, minimal system development board powered by the latest ESP-WROOM-32 module and can be easily inserted into a solderless breadboard.
It contains the entire basic support circuitry for the ESP-WROOM-32, including the USB-UART bridge, reset- and boot-mode buttons, LDO regulator and a micro-USB connector. Every important GPIO is available to the developer.
₹536.90 Price Including GST
Out of stock
Receive in-stock notifications for this.
ESP32 Development Board WiFi+Bluetooth 30 Pin
ESP32 Development Board Feature:
100% brand new and high quality.
ESP32 is already integrated antenna and RF balun, power amplifier,low-noise amplifiers, filters, and power management module.
The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
High performance-price ratio.
Small volume, easily embedded to other products.
Strong function with support LWIP protocol, Freertos.
Supporting three modes: AP, STA, and AP+STA.
Supporting the Lua program, easily to develop.
Application :
Universal low power IoT sensor hub.
Home automation.
Universal low power IoT recorder.
Mesh network.
Video streaming of the camera.
Industrial wireless control.
OTT TV box / set-top box device.
Baby monitor.
Smart Socket.
Sensor networks.
Wi-Fi toys: Counters, toys, Anti-lost device.
Wearable electronic products.
Wi-Fi speech recognition device.
Wi-Fi location-aware devices.
Based on 0 reviews
Be the first to review “ESP32 Development Board WiFi+Bluetooth 30 pin”
You may also like…
-
IoT & Wireless
ESP-WROOM-32 Espressif WiFi + Bluetooth Module
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROOM-32 WiFi / Bluetooth Classic / BLE Module!
According to Espressif, the ESP-WROOM-32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, music streaming and MP3 decoding.
SKU: CE-W012 -
IoT & Wireless, Modules & Sensors
NodeMcu ESP8266 V3 with CP2102
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language.
SKU: CE-W002 -
IoT & Wireless, Modules & Sensors
ESP32 Development Board WiFi+Bluetooth 38 Pin
ESP32 Development board is based on the ESP WROOM32 WIFI + BLE Module.It’s a low-footprint, minimal system development board powered by the latest ESP-WROOM-32 module and can be easily inserted into a solderless breadboard.
It contains the entire basic support circuitry for the ESP-WROOM-32, including the USB-UART bridge, reset- and boot-mode buttons, LDO regulator and a micro-USB connector. Every important GPIO is available to the developer.
SKU: CE-M0152
Related products
-
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & Kits
HC-06 Bluetooth serial pass-through module
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & KitsHC-06 Bluetooth serial pass-through module
This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.0+EDR standard. In Bluetooth 2.0, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth. This module is set with serial interface, which is easy to use and simplifies the overall design/development cycle.
SKU: CE-M048 -
IoT & Wireless
RA-02 LoRa Module Breakout Board, RF Wireless Transceiver
Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-02 is designed and developed by AI-THINKER Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa ™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa ™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme can not consider the distance, interference and power consumption at the same time.
SKU: CE-W016 -
Developments Boards, IoT & Wireless, Modules & Sensors
HC-05 Bluetooth RF Transceiver Module serial RS232 TTL
Developments Boards, IoT & Wireless, Modules & SensorsHC-05 Bluetooth RF Transceiver Module serial RS232 TTL
To setup Wireless Serial Communication, HC-05 Bluetooth Module is most demanding and popular due to its low price and extremely high features.This module can be used in Master or Slave Mode and easy switchable between these two modes, By default Slave mode is configured.
Modes can be changed using AT Commands.The slave mode in HC-05 cannot initiate a connection to another Bluetooth device, but can accept connections.Master mode can initiate a connection to other devices.
SKU: CE-W003 -
IoT & Wireless
ESP32S Wroom Wireless Wifi Bluetooth Module Adapter Plate
The ESP32 is a very powerful Wifi and Bluetooth module but difficult to work with due to its small size and many available pins. The pins are extremely close to each other and nearly impossible to solder wires to it.
SKU: CE-W012-1
There are no reviews yet.