3.6 V 6400 Mah lithium-ion battery Pack inbuilt BMS protection
4 in stock
3.6V 3200 Mah lithium-ion battery Pack inbuilt BMS protection, 18650 cells, actual capacity.BMS In-built )3.6V 6400 Mah lithium-ion battery Pack inbuilt BMS protection. When this Battery is fully charged, it can deliver up to 4.2V. BMS Circuit is already inside this battery pack for protection. Actual Capacity
₹566.40 Price Including GST
4 in stock
Compare3.6 V 6400 Mah lithium-ion battery pack, inbuilt BMS protection, 18650 cells, actual capacity
(BMS In-built )
Description:-
Very Small in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries
Full Charge in 40 to 90 minutes depending upon the special charger
Long life with full capacity for up to 1000 charge cycles
2X Li-ion 3.7V 3200mAh cells (2S1P)
Low maintenance
Dimensions : 67 x 37 x 19 mm (Approx)
3.6V 3200mAh 18650 cells
Weight: 130 grams (Approx)
Maximum safe discharge current
Maximum charging voltage: 5V (Do not overcharge the cell; it may explode or be internally damaged.)
Application:-
- POS Printer
- GPS
- Medical Devices
- Solar / Emergency Lights
- DIY projects
- label Printer etc
- MP3 Player
- Package Includes:-
1 x 3.6V 6400 mAh Battery Pack (BMS Inside)
| Weight | 120 g |
|---|
Applications:
Small-Scale UPS Battery
GPS Tracking – Vehicle Tracking – Asset Tracking
WiFi Modem or Router Backup Battery
CCTV Camera Backup
PSP
Industrial Machines
Emergency Lights
Solar Lights
Robotics and RC Cars
Music Players and Audio Systems
Based on 0 reviews
Be the first to review “3.6 V 6400 Mah lithium-ion battery Pack inbuilt BMS protection”
You may also like…
Related products
-
-
Heat Shrink Sleeves
PVC Sleeve 61 mm Yellow Heat Shrink Tube 1M
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
SKU: CE-23-00164 -
Batteries, Batteries & Chargers, Battery Pack, BMS
6000 Mah 3.2 V Battery Pack with BMS circuit
6000 Mah 3.2 V Battery 3C Rated Pack with BMS circuit. This is a battery pack with a two-pin female connecter. 32700 Battery 6000 Mah Lithium Fero Phospate
BIS Standard Grade A. It can be charge through 5V DC powerSKU: CE-21-00092 -
Heat Shrink Sleeves
PVC Heat Shrink Sleeve 33mm For Battery Pack 1M
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
SKU: CE-BHST-33
There are no reviews yet.