Showing all 20 results

  • 433MHz RF

    433MHz RF Wireless Module Receiver and Transmitter

    This module provides a very cost effective wireless solution with a maximum data rate upto 4Kbps. It can be used as Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo and alarm systems.

    Rs.70.00 Add to cart
  • ESP32S Wroom Wireless Wifi Bluetooth Module Adapter Plate

    The ESP32 is a very powerful Wifi and Bluetooth module but difficult to work with due to its small size and many available pins. The pins are extremely close to each other and nearly impossible to solder wires to it.

     

    Rs.50.00 Add to cart
  • Sale!
    Battery Shield For WeMos D1 mini battery Charging and BoostBattery Shield For WeMos D1 mini battery Charging and Boost2

    Battery Shield For WeMos D1 mini battery Charging and Boost

    The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.

    Rs.270.00 Rs.199.00 Add to cart
  • Sale!

    ESP 01 / ESP8266 Programmer CH340G Chip USB WiFi Wireless UART GPIO0

    This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USb bus and and jumper (on the right of the 2x4P header) will help configuring the GPIO0 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.

    Rs.422.00 Rs.199.00 Add to cart
  • esp-01 /Esp 8266

    esp-01 /Esp 8266 Wireless WIFI to UART Module

    ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.

    Rs.175.00 Read more
  • ESP-WROOM-32 Espressif WiFi + Bluetooth Module

    ESP-WROOM-32 Espressif WiFi + Bluetooth Module

    The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROOM-32 WiFi / Bluetooth Classic / BLE Module!

    According to Espressif, the ESP-WROOM-32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, music streaming and MP3 decoding.

    Rs.430.00 Add to cart
  • ESP8266 12F Adapter Base Plate

    This ESP8266 Adapter Plate is an Adapter PCB Plate for ESP-07, ESP-08, ESP-12E ESP8266 SMD ESP8266 Module. These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and can use your favorite ESP8266 SMD modules on breadboards or on perforated boards.

    Rs.25.00 Add to cart
  • ESP8266 ESP-12F WiFi Serial IOT ModuleESP8266 ESP-12F WiFi Serial IOT Module

    ESP8266 ESP-12F WiFi Serial IOT Module

    ESP-12F (ESP8266) is an ultra-low power UART-WiFi module. It has excellent dimensions and ULP technology compared to other similar modules. The module is special design for mobile devices and Internet of Things.

    Rs.160.00 Add to cart
  • Sale!
    HC-05-Wireless-Bluetooth-RF-Transceiver-Module-serial-RS232-TTL-for-arduino HC-05-Wireless-Bluetooth-RF-Transceiver-Module-serial-RS232-TTL-for-arduino Have one to sell? Sell it yourself HC-05 Wireless Bluetooth RF Transceiver Module serial RS232 TTL 001HC-05-Wireless-Bluetooth-RF-Transceiver-Module-serial-RS232-TTL-for-arduino HC-05-Wireless-Bluetooth-RF-Transceiver-Module-serial-RS232-TTL-for-arduino Have one to sell? Sell it yourself HC-05 Wireless Bluetooth RF Transceiver Module serial RS232 TTL2

    HC-05 Bluetooth RF Transceiver Module serial RS232 TTL

    To setup Wireless Serial Communication, HC-05 Bluetooth Module is most demanding and popular due to its low price and extremely high features.This module can be used in Master or Slave Mode and easy switchable between these two modes, By default Slave mode is configured.

    Modes can be changed using AT Commands.The slave mode in HC-05 cannot initiate a connection to another Bluetooth device, but can accept connections.Master mode can initiate a connection to other devices.

    Rs.350.00 Rs.245.00 Add to cart
  • HC-06 Bluetooth serial pass-through moduleHC-06 Bluetooth serial pass-through module1

    HC-06 Bluetooth serial pass-through module

    This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.0+EDR standard. In Bluetooth 2.0, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth. This module is set with serial interface, which is easy to use and simplifies the overall design/development cycle.

    Rs.275.00 Add to cart
  • IPEX Connector Antenna

    IPEX Connector Antenna SIM800L GPS GPRS GSM Module

    IPEX Connector Antenna for SIM800L GPRS SIM GSM Wireless Module. It can enhanced the reception & Transmission power. Easy to install.

    Rs.190.00 Add to cart
  • NEO6MV2 GPS Module

    NEO6MV2 GPS Module NEO-6M with Flight Control EEPROM

    This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.

    The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.

    The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.

    Rs.600.00 Read more
  • NodeMcu ESP8266 V3 with CP2102

    NodeMcu ESP8266 V3 with CP2102

    NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language.

    Rs.270.00 Add to cart
  • Sale!

    NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range

    The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!

    This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.

    This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.

    Rs.345.00 Rs.199.00 Add to cart
  • NRF24L01+ 2.4GHz Wireless Transceiver Module low power 1NRF24L01+ 2.4GHz 002

    NRF24L01+ 2.4GHz Antenna Wireless Transceiver Module

    Rated 5.00 out of 5

    NRF24L01+ Module This module based on Nordic nRF24L01+, highly integrated, ultra-low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.

    Rs.80.00 Add to cart
  • RA-02 LoRa Module

    RA-02 LoRa Module , RF Wireless Transceiver

    Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-02 is designed and developed by AI-THINKER Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa ™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa ™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme can not consider the distance, interference and power consumption at the same time.

    Rs.530.00 Read more
  • RA-02 LoRa Module Breakout BoardRA-02 LoRa Module Breakout Board

    RA-02 LoRa Module Breakout Board, RF Wireless Transceiver

    Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-02 is designed and developed by AI-THINKER Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa ™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa ™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme can not consider the distance, interference and power consumption at the same time.

    Rs.630.00 Add to cart
  • SIM 800L GSM GPRS MODULE MICRO SIM CARD

    SIM 800L GSM GPRS MODULE MICRO SIM CARD

    The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS technique which is called mobile positioning and gets position by mobile network. This features make it can also be a tracker module.

    Rs.436.00 Add to cart
  • Sale!

    SN65HVD230 CAN Communication Module Bus Transceiver

    SN65HVD230 can be used under high interference environment. The device has the ability to send and receive good at different rates.Its main features are as follows: Fully compatible with ISO11898 standard; High input impedance. allowing 120 nodes; Low current standby mode. the typical current of 370A; Signal transfer rate up to 1Mb / s;Thermal protection. open circuit failure protection function; With anti-instantaneous interference protection bus; Slope control. reduce radio frequency interference (RFI);Differential receiver with a wide range of anti-common-mode interference. electromagnetic interference (EMI) capabilities.

    Rs.350.00 Rs.245.00 Add to cart
  • Sale!
    Wemos D1 Mini ESP8266

    Wemos D1 Mini ESP8266 WIFI board for Arduino IOT

    This is D1 mini, it is a mini WIFI board based on ESP-8266EX.

    11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire

    supported(except D0) 1 analog input(3.3V max input) a Micro USB connection

    Rs.420.00 Rs.237.00 Add to cart