5V 1A Power Bank Charger Board Circuit PCB Boost Module
Out of stock
5V 1A outpur powr bank pcb module. input 5V .Charging status monitoring bt LED
₹247.80 Price Including GST
Out of stock
Compare5V 1A Power Bank Charger Board Circuit PCB Boost Module
- Aplly Battery Type:18650 battery(not include)
- Output Voltage:5V/1A
- Input Voltage:3.2V-4.2V
- Length 7.1cm
- 8cm.
- High 0.5cm
- Connection: The battery positive should connect B+, and battery negative should connect GND
Based on 0 reviews
Be the first to review “5V 1A Power Bank Charger Board Circuit PCB Boost Module”
You may also like…
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC Buck Converter 5V3A USB Output Module
- – The max output current 3A, long time use 2.1A, enough use
- – New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
- – Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
- – Flat copper inductor, improve conversion efficiency
- – With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
- – Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
- – High quality USB port
- – Output voltage indicator (RED)
- – Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
- – Input with reverse polarity protection diode, will not damage when input connect incorrect
- – Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable
SKU: CE-M011 -
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCB
Battery Holder Cylindrical 3 AAA Plastic Battery Adapeter
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCBBattery Holder Cylindrical 3 AAA Plastic Battery Adapeter
Battery Holder Black Cylindrical 3 AAA Plastic Battery Holder Adapter Case Box Flashlight Lamp. use as a replacement of 18650 battery model.
it comparable with all 18650 battery socketSKU: CE-E002-C-AAA -
Batteries & Chargers, Circuits Boards & PCB
5V 1A 2.1A Mobile Power Bank PCB 18650 Battery Charger Module with LCD
Batteries & Chargers, Circuits Boards & PCB5V 1A 2.1A Mobile Power Bank PCB 18650 Battery Charger Module with LCD
This is the mobile power module Accessories, 18650 Circuit board shell.
Meet the individual needs of your DIY, but you must understand basic electronic assembly.
Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection.
Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge.
Output voltage and current stable, will not harm user devices.SKU: CE-M010
Related products
-
Batteries & Chargers, Circuits Boards & PCB
Lipo Battery Low Voltage Tester 1S-8S Buzzer
The LiPo low voltage Tester cum Alarm is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will go off with flashing LED if the voltage on any of the individual cells drops below the adjustable threshold. Essential while working with any Lithium Polymer battery.
SKU: CE-M071 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyMT3608 2A Max DC-DC Step Up Power Module Booster Power Module
MT3608 2A Max DC-DC Step Up Power Module Booster
Specifications:
2V to 24V input voltage with output boost 5V to 28V adjustable
Maximum output current: 2A
Input voltage: 2V ~ 24V
Maximum output voltage: > 5V – 28V
Efficiency: > 93%
Input voltage should not exceed the maximum input voltage
Peak current output current should not more than 2A
Output voltage should always be higher than Input voltage
PCB Size: 36 mm * 17 mm * 14 mm
SKU: CE-M026 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
USB Charger DC-DC PFM Control 0.9-5V Boost module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyUSB Charger DC-DC PFM Control 0.9-5V Boost module
Mini PFM Control.On-board input voltage indicator.High conversion efficiency, maximum to 96%.Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable,
with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MA On-board USB female, can supply power directly to the USB interfaceSKU: CE-M020 -
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCB, Power Supply
Lithium Battery Charging Board TP 4056 Micro USB with Protection
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCB, Power SupplyLithium Battery Charging Board TP 4056 Micro USB with Protection
This tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that don’t have their own protection circuit.Based around the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.Futhermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
For Bulk Quantity Please call US:- +91 9830150448
SKU: CE-M029
There are no reviews yet.