5V Boost Power Supply DC-DC 2V-5V 2A Fixed Output
Out of stock
DC-DC 2V-5V to 5V Step Up Boost Power Supply Module Voltage Converter Board 2A Fixed Output For Dry Lithium Battery Board
₹182.90 Price Including GST
Out of stock
Compare5V Boost Power Supply DC-DC 2V-5V 2A Fixed Output
5V Boost Power Supply Description
- Module Properties: non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1~5.2V
- Output Current: Rated 1A~1.5A (Single lithium battery input)
- Conversion efficiency: up to 96% ( input voltage, the higher the efficiency )
- Switching Frequency: 500KHz
- Output ripple: 30mV (Max) 20M Bandwidth ( Input 4V, Output 5.1V 1A)
- Voltage indication: LED lights with a load (input voltage is lower than 2.7V LED indicator off )
- Operating temperature: Industrial grade (-40 Celsius to +85 Celsius )
- Full load temperature rise: 30 Celsius
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None
16.Input Reverse Polarity Protection: None
17.Wiring: Welding
Based on 0 reviews
Be the first to review “5V Boost Power Supply DC-DC 2V-5V 2A Fixed Output”
You may also like…
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC Buck Converter 5V3A USB Output Module
- – The max output current 3A, long time use 2.1A, enough use
- – New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
- – Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
- – Flat copper inductor, improve conversion efficiency
- – With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
- – Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
- – High quality USB port
- – Output voltage indicator (RED)
- – Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
- – Input with reverse polarity protection diode, will not damage when input connect incorrect
- – Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable
SKU: CE-M011
Related products
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064 -
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors
0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
- this voltmeter uses three-position 0.36inch LED digital tube display, no shell, thin thickness, small appearance, low price, stable performance and good display.
- The measuring range of the voltmeter can be DC 0-100V. The working power supply should be supplied by the outside, the voltage range is DC 4.5-30V, and the protection will be received.
- The display resolution of this voltmeter is fixed to 0.1V.
- This voltmeter is suitable for users with DC power supply to save cost. Or you need to start measuring from 0V
SKU: n/a -
Batteries & Chargers, Circuits Boards & PCB
TP4056 Micro USB 1A 18650 Lithium Battery Charger Module
The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module has on-board Micro USB interface. With Micro-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
SKU: CE-M029-W
There are no reviews yet.