ESP8266 ESP-12F WiFi Serial IOT Module
Out of stock
ESP-12F (ESP8266) is an ultra-low power UART-WiFi module. It has excellent dimensions and ULP technology compared to other similar modules. The module is special design for mobile devices and Internet of Things.
₹188.80 Price Including GST
Out of stock
CompareESP8266 ESP-12F WiFi Serial IOT Module
It improved on the Following:
✓Peripheral circuit
✓The four laminates plate process
✓Enhanced impedance matching
✓Stronger WiFi signal output
✓Anti jamming ability
✓PCB antenna redesigned after professional laboratory testing
Features :
Compatible with ESP-12（ESP-202）
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
It is very easy to develop projects with AT commands
Surface Mount Package with 2mm Pitch Pads
Mulitple GPIO’s for all your sensor needs
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, DCXO and power management units
+19.5dBm output power
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as an application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Both SMD and Inline package are available, and the pin pitch is 2.0mm.
Based on 0 reviews
Be the first to review “ESP8266 ESP-12F WiFi Serial IOT Module”
You may also like…
-
Circuits Boards & PCB, IoT & Wireless
ESP8266 12F Adapter Base Plate
This ESP8266 Adapter Plate is an Adapter PCB Plate for ESP-07, ESP-08, ESP-12E ESP8266 SMD ESP8266 Module. These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and can use your favorite ESP8266 SMD modules on breadboards or on perforated boards.
SKU: CE-W004-A -
IoT & Wireless, Modules & Sensors
NodeMcu ESP8266 V3 with CP2102
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language.
SKU: CE-W002
Related products
-
IoT & Wireless
RA-02 LoRa Module Breakout Board, RF Wireless Transceiver
Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-02 is designed and developed by AI-THINKER Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa ™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa ™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme can not consider the distance, interference and power consumption at the same time.
SKU: CE-W016 -
IoT & Wireless, Modules & Sensors
NEO6MV2 GPS Module NEO-6M with Flight Control EEPROM
This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.
The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.
SKU: CE-M0110 -
IoT & Wireless, Modules & Sensors
Relay Module ESP-01 5V WiFi 5V For Remote Control Switch
This WiFi relay module carries a ESP8266 WiFi module and micro controller. It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.
SKU: CE-M0119
There are no reviews yet.