HC-12 Wireless SI4463 Radio Chip Transceiver Module
16 in stock
HC-12 is a long-distance wireless transmission with the range of 1,000m in open space/baud rate 5,000bps in the air.Working frequency range is 433.4-473.0MHz, up to 100 communication channels Maximum 100mW (20dBm) transmitting power (8 gears of power can be set) Built-in MCU, performing communication with external device through serial port. The number of bytes transmitted unlimited to one time.Update software version through serial port
₹578.20 Price Including GST
16 in stock
CompareHC-12 Wireless SI4463 Radio Chip Transceiver Module
HC-12 Wireless SI4463 Description
IEEE 802.15.4g compliant
Frequency range = 119–1050 MHz
Receive sensitivity = –126 dBm
Serial TTL (RX, TX, GND) interface
Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK
Max output power +20 dBm
Low active power consumption 10/13 mA RX, 18 mA TX at +10 dBm
Ultra low current powerdown modes 30 nA shutdown, 50 nA standby
Data rate = 100 bps to 1 Mbps
Fast wake and hop times
Highly configurable packet handler
TX and RX 64 byte FIFOs
Auto frequency control (AFC)
Automatic gain control (AGC)
Low BOM
Low battery detector
FCC Part 90 Mask D, FCC part 15.247, 15,231, 15,249, ARIB T-108, T-96, T-67, RCR STD-30, China regulatory
ETSI Class-I Operation with SAW
Based on 0 reviews
Be the first to review “HC-12 Wireless SI4463 Radio Chip Transceiver Module”
Related products
-
IoT & Wireless, Modules & Sensors
NEO6MV2 GPS Module NEO-6M with Flight Control EEPROM
This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.
The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.
SKU: CE-M0110 -
Circuits Boards & PCB, IoT & Wireless
ESP8266 12F Adapter Base Plate
This ESP8266 Adapter Plate is an Adapter PCB Plate for ESP-07, ESP-08, ESP-12E ESP8266 SMD ESP8266 Module. These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and can use your favorite ESP8266 SMD modules on breadboards or on perforated boards.
SKU: CE-W004-A -
IoT & Wireless, Modules & Sensors
NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
IoT & Wireless, Modules & SensorsNRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!
This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.
SKU: CE-W005 -
Developments Boards, IoT & Wireless, Modules & Sensors
SN65HVD230 CAN Communication Module Bus Transceiver
Developments Boards, IoT & Wireless, Modules & SensorsSN65HVD230 CAN Communication Module Bus Transceiver
SN65HVD230 can be used under high interference environment. The device has the ability to send and receive good at different rates.Its main features are as follows: Fully compatible with ISO11898 standard; High input impedance. allowing 120 nodes; Low current standby mode. the typical current of 370A; Signal transfer rate up to 1Mb / s;Thermal protection. open circuit failure protection function; With anti-instantaneous interference protection bus; Slope control. reduce radio frequency interference (RFI);Differential receiver with a wide range of anti-common-mode interference. electromagnetic interference (EMI) capabilities.
SKU: CE-M065
There are no reviews yet.