Description:
Model:2.7V500F
Size:35 * 60 (mm)
Capacitance: 500F
Tolerance: -10%, + 20%
Voltage: 2.7V
Operating temperature: -40 ° C ~ 60 ° C
ESR (Equivalent Series Resistance): 10 milliohms
Life: 25 ° C 87600 hours
Applications:
Applies to: car Rectifier, can improve / stereo / speaker, extended battery life, balanced voltage, in series add fuse and wire
can be used in parallel on the battery!
Effect: more than 30 percent away, on the slopes and powerful, but also for solar energy
For example: with 6 2.7v500f series can be made with a capacity of 16V83F automotive rectifier.
Also can enjoy the fun of DIY their own and a sense of accomplishment
Pcakage include:
1 x diymore Super Farad Capacitor 2.7V 500F 35*60MM Capacitors
ELECTROLYTIC CAPACITOR 2200uF 25V, Through Hole Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode—fixed Capacitor Application: Lighting Type: Electrolytic Capacitor Model Number: 2200uf 25V. An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a skinny layer of aluminum oxide as dielectric, and which has an electrolyte as its second electrode. Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their anodization principle. They can only be operated with DC voltage applied with the correct polarity.
High purity Etched and Formed Aluminium foil with aluminium oxide dielectric barrier as anode foil and an aluminium cathode foil are concentrically wound with a layer of condenser grade paper in between and after impregnation with electrolyte, the wound element is housed in an Aluminium can and then hermetically sealed using a rubber bung to form an Aluminium electrolytic capacitor. The most important advantage of the electrolytic capacitors are the higher capacitance ratio to dimensions when compared with other capacitors. This is principally due to microscopically thin dielectric layer, which produces large capacitance per unit area. Over the years there have been continuous improvements in the etching technology of anode foil that has resulted in many fold increase in the actual anode surface area resulting in reduction in capacitor size. The oxide dielectric layer has rectifier properties blocking current flow in one direction but offering low resistance in the opposite direction. Reversal of more than two volts will cause breakdown of the film and detruction of the capacitor. So Electrolytic Capacitor for AC applications are specially manufactured and marked Non polar/AC. Others are polar Capacitors and there for limited to DC applications.
Select at least 2 products
to compare
alligator crocodile clips set 1 pair red & black 
DC Jack 5.5 X 2.1mm male With 9 inch Wire 
DC Power Jack Barrel Type Female 5.5*2.1mm Round socket 
LDR 5 mm Light Dependent Resistance 
There are no reviews yet.