Battery Shield For WeMos D1 mini battery Charging and Boost
25 in stock
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
₹234.82 ₹318.60 Price Including GST
25 in stock
CompareBattery Shield For WeMos D1 mini battery Charging and Boost
Specification
- Charging Voltage: 10V MAX 5V Recommended
- Charging Current: 1A
- Lithium Battery Voltage: 3.3-4.2V
- Boost Power Supply: 5V (Max 1A)
Ports:
- XH2-2.54mm (Port 1): Connect to lithium battery (3.3-4.2V)
- Micro USB: Charging Port (5V)
- Green LED: Illuminates when charging is complete
- Red LED: Illuminates when charging is in progress
- J1: Sets the maximum charging current: 0.5A or 1A
Based on 0 reviews
Be the first to review “Battery Shield For WeMos D1 mini battery Charging and Boost”
You may also like…
Related products
-
IoT & Wireless, Modules & Sensors
esp-01 /Esp 8266 Wireless WIFI to UART Module
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
SKU: CE-W010 -
Developments Boards, IoT & Wireless
433MHz RF Wireless Module Receiver and Transmitter
This module provides a very cost effective wireless solution with a maximum data rate upto 4Kbps. It can be used as Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo and alarm systems.
SKU: CE-W008 -
IoT & Wireless, Modules & Sensors
NEO6MV2 GPS Module NEO-6M with Flight Control EEPROM
This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.
The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.
SKU: CE-M0110
There are no reviews yet.