Wemos D1 Mini ESP8266 WIFI board for Arduino IOT
Out of stock
This is D1 mini, it is a mini WIFI board based on ESP-8266EX.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire
supported(except D0) 1 analog input(3.3V max input) a Micro USB connection
₹279.66 ₹495.60 Price Including GST
Out of stock
Receive in-stock notifications for this.
Wemos D1 Mini ESP8266 WIFI board for Arduino IOT
Features
- 11 digital input/output pins
- Interrupt/pwm/I2C/one-wire
- 1 analog input(3.2V max input)
- 1M bytes(128M bit) Flash
- Built-in PCB antenna
- New CH340G USB-TO-UART IC
- Same size as D1 mini, but more light
Package Contents:
1×WeMos D1 mini Board
2×Long female pins
2×Short female pins
2×Normal pins
For Tutorial Please click Bellow Button
Based on 0 reviews
Be the first to review “Wemos D1 Mini ESP8266 WIFI board for Arduino IOT”
Related products
-
Developments Boards, IoT & Wireless
433MHz RF Wireless Module Receiver and Transmitter
This module provides a very cost effective wireless solution with a maximum data rate upto 4Kbps. It can be used as Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo and alarm systems.
SKU: CE-W008 -
Developments Boards, IoT & Wireless, Modules & Sensors
SN65HVD230 CAN Communication Module Bus Transceiver
Developments Boards, IoT & Wireless, Modules & SensorsSN65HVD230 CAN Communication Module Bus Transceiver
SN65HVD230 can be used under high interference environment. The device has the ability to send and receive good at different rates.Its main features are as follows: Fully compatible with ISO11898 standard; High input impedance. allowing 120 nodes; Low current standby mode. the typical current of 370A; Signal transfer rate up to 1Mb / s;Thermal protection. open circuit failure protection function; With anti-instantaneous interference protection bus; Slope control. reduce radio frequency interference (RFI);Differential receiver with a wide range of anti-common-mode interference. electromagnetic interference (EMI) capabilities.
SKU: CE-M065 -
Circuits Boards & PCB, IoT & Wireless, Power Supply
Battery Shield For WeMos D1 mini battery Charging and Boost
Circuits Boards & PCB, IoT & Wireless, Power SupplyBattery Shield For WeMos D1 mini battery Charging and Boost
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
SKU: CE-M086 -
IoT & Wireless, Modules & Sensors
NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
IoT & Wireless, Modules & SensorsNRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!
This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.
SKU: CE-W005
There are no reviews yet.