CoreLess Motors DC 3.7V-4.2V 50000RPM 7mm x 16mm Micro Brush Motor 2 Pcs Set
Out of stock
High speed core less samll motor . Its very use full for DIY project & your RC plane
₹234.82 Price Including GST
Out of stock
CompareCoreLess Motors DC 3.7V-4.2V 50000RPM 7mm x 16mm Micro Brush Motor 2 Pcs Set
This is a rare motor, and the small motor torque is very large, which is the value of it!
Including: 2* motors, 2 *propeller(1*L propeller+1*R propeller)
Voltage: DC 3.7-4.2V
Current: 0.08A–0.1A
Speed: DC3.7V——32000 RPM; D4.2V—–55000RPM
Motor diameter: 7MM
Motor length: 16MM
Output shaft diameter: 0.8MM
Output shaft length: 8MM
Weight: 2g
Propeller length: 45MM
Propeller: Red or Black
Package Include:
2pcs DC3.7-4.2V 716 7*16MM Micro DIY Helicopter Coreless DC Motor With Propeller
1 Set CW & 1 Set CCW
Based on 0 reviews
Be the first to review “CoreLess Motors DC 3.7V-4.2V 50000RPM 7mm x 16mm Micro Brush Motor 2 Pcs Set”
Related products
-
Modules & Sensors, Motor Drives & controllers
AC 220V 2000W SCR Voltage Regulator Dimming Dimmers Speed Controller Thermostat
Modules & Sensors, Motor Drives & controllersAC 220V 2000W SCR Voltage Regulator Dimming Dimmers Speed Controller Thermostat
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.As the power has very big,so the normal home appliances or small factories enough to use.This pressure regulator with two-way high power silicon controlled, potentiometer have nuts, can use not need add any components, very convenient and practical.Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.Applicable Appliance: Electric furnace, water heater, lamps, small motor, electric iron. etc
SKU: CE-M012 -
Motor Drives & controllers, Robots & Kits
Geared Motor DC , 12V, Center Shift 10 RPM
DC Motor – 10 RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
10 RPM 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
SKU: CE-GM-10-R -
Modules & Sensors, Motor Drives & controllers
L293D Motor Driver Shield for Arduino
This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.
The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.
SKU: CE-M0172
There are no reviews yet.