-
×
Flame Sensor Or Fire Ignition Sensor Module 4 pin
1 × ₹116.82
Subtotal: ₹116.82 (incl. VAT)
Developments Boards, Modules & Sensors
Compare
DHT-11 Digital Temperature And Humidity Sensor
Availability:
Out of stock
DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity, but its smaller and less expensive
₹94.40 Price Including GST
Out of stock
Receive in-stock notifications for this.
DHT-11 Digital Temperature And Humidity Sensor
DHT11 is a Humidity and Temperature Sensor, which generates calibrated digital output. DHT11 can be interface with any microcontroller like Arduino, Raspberry Pi, etc. and get instantaneous results. DHT11 is a low cost humidity and temperature sensor which provides high reliability and long term stability.It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and outputs a digital signal on the data pin (no analog input pins needed). Its very simple to use, and libraries and sample codes are available for Arduino and Raspberry Pi.This module makes is easy to connect the DHT11 sensor to an Arduino or microcontroller as includes the pull up resistor required to use the sensor. Only three connections are required to be made to use the sensor – Vcc, Gnd and Output.It has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology.
Specifications:-
Power Supply： 3.3~5.5V DC
Output： 4 pin single row
Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
Accuracy： Humidity +-5%RH， Temperature +-2℃
Resolution： Humidity 1%RH， Temperature 1℃
Interchangeability： Fully Interchangeable
Long-Term Stability： <±1%RH/year
Based on 0 reviews
Be the first to review “DHT-11 Digital Temperature And Humidity Sensor”
You may also like…
-
Modules & Sensors
BMP280 Pressure Sensor Module High Precision Atmospheric
- Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
- This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
SKU: CE-M036 -
Developments Boards, Modules & Sensors
DHT22 Temperature and Humidity Sensor
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.
SKU: CE-M009 -
Modules & Sensors
Barometric Pressure Sensor BMP180 Digital Board Module
BMP180 Digital Barometric Pressure Sensor Board Module Arduino Compatible Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high resolution noise.The device will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.SKU: CE-M037
Related products
-
Developments Boards, Modules & Sensors
TTP223 CAPACITIVE TOUCH MODULE
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Job type: the initial state is low, high touch, do not touch is low ( similar touch of a button feature ). A module can be installed in such as surface plastic, the glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons.
SKU: CE-M0106 -
Developments Boards, Modules & Sensors
16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
Developments Boards, Modules & Sensors16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
• 8 pin connector
• Adhesive mounting
• Maximum Circuit Rating: 35VDC, 100mA
• Insulation Resistance: 100M Omh, 100V
• Dielectric Withstand: 250VRms (50-60Hz, 1min)
• Contact Bounce: <=5ms
• Life Expectancy: 1 million closures
• Operation Temperature: 0 to 70 centigrade
• Humidity: 40 centigrade, 90%-95%, 240 hours
• Pad Size (L x W): Approx. 3 x 2.7 inch / 76 x 69 mm
• Flexible Circuit Length: Approx. 3.3 inch / 83 mmSKU: CE-M032 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
FT232RL FTDI USB to TTL Serial Adapter Module
Circuits Boards & PCB, Developments Boards, Modules & SensorsFT232RL FTDI USB to TTL Serial Adapter Module
Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
SKU: CE-M070
There are no reviews yet.