DHT11 Temperature And Humidity Sensor Module
50 in stock
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.
₹94.40 Price Including GST
50 in stock
CompareDHT11 Temperature And Humidity Sensor Module
- Humidity measurement range: 20%~90%RH
- Humidity measurement error: ±5%RH
- Temperature measurement range: 0~60
- Temperature measurement error: ±2
- Working voltage :5 V
- Size: 28x12x8mm
- The module can detect surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- output form digital output
- has fixed bolt hole and easy installation
Package Include:-
1X DHT 11 Module
You May Like This
Based on 0 reviews
Be the first to review “DHT11 Temperature And Humidity Sensor Module”
You may also like…
-
Modules & Sensors
Temperature & Humidity Sensor DHT 21 Digital Output
DHT21 Capacitive Digital Temperature & Humidity Sensor sensor is one of the commonest from the range of DHT temperature sensors and boasts a relatively high-temperature measurement accuracy of 0.5oC in 0.1oC steps with a relative humidity accuracy of +/- 3%. It has only 3 wires, including power and ground, meaning only one digital pin is required to interface it to a microcontroller. For Arduino development platforms the sensor is very well supported by the DHT library available from the Arduino Playground website.
SKU: CE-M0147 -
Developments Boards, Modules & Sensors
DHT-11 Digital Temperature And Humidity Sensor
DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity, but its smaller and less expensive
SKU: CE-M097 -
Developments Boards, Modules & Sensors
DHT22 Temperature and Humidity Sensor
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.
SKU: CE-M009
Related products
-
Developments Boards, Modules & Sensors
USB To TTL Converter RS232 CH340G Module Adapter
The CH340 series of chips are a full-speed USB device that emulates a standard serial interface, with speeds from 50bps to 2Mpbs.The chip supports 5V and 3.3V, selectable via a jumper (included).You can easily use it for serial communication to your MCUs (Arduinos,RPis,etc).Each Board is tested by our experts at Nexgen Gadgets before dispatching to ensure reliable & flawless working.
SKU: CE-M016 -
-
IoT & Wireless, Modules & Sensors
NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
IoT & Wireless, Modules & SensorsNRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!
This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.
SKU: CE-W005 -
Modules & Sensors
Barometric Pressure Sensor BMP180 Digital Board Module
BMP180 Digital Barometric Pressure Sensor Board Module Arduino Compatible Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high resolution noise.The device will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.SKU: CE-M037
There are no reviews yet.