Digispark ATTiny85 USB Development Board Digistump
Out of stock
- 100% Brand New and High Build Quality
- The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.
- The Digispark is shipped fully assembled except for the two included and easy to solder headers.
₹141.60 Price Including GST
Out of stock
Receive in-stock notifications for this.
Digispark ATTiny85 USB Development Board Digistump
Technical parameters:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source – 5v or 7-35v (12v or less recommended, automatic selection)
- On-board 500ma 5V Regulator
- Built-in USB
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can
- use all 6 even if you are programming via USB)
- 8k Flash Memory (about 6k after bootloader)
- I2C and SPI (vis USI)
- PWM on 3 pins (more possible with Software PWM)
- ADC on 4 pins
- Power LED and Test/Status LED
Package Contents:
- 1x Digispark Kickstarter ATTINY85 Arduino
Related products
-
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062 -
Circuits Boards & PCB, Motor Drives & controllers, Robots & Kits
8 mm Coin Flat Micro Vibrator Motor
Phone vibration motor is a DC brush motor for achieving the phone’s vibration feature, when you receive a text message or phone, the motor starts to drive high-speed rotating eccentric done, resulting in vibration. Specification： Type: 0834 Material: iron Size: 8*3.4mm，wire 15mm(L) Rated voltage : 3.0 VDC Rated current: 70mA Max Rated rotor speed: 12000±2500RPM Min Operating environment: -20℃～+60℃ Save environment::-30℃～+70℃ For: Mobile phones, Pager,Electronic vibration equipment Small size meets the needs of an increasingly mobile thin fuselage. Package includes: 1 PC Coin Flat Vibrating Micro Motor DC 3V 8mm For Pager and Cell Phone Mobile
SKU: CE-M072 -
Robots & Kits, Toys , RC Plane & Drone
Robot Wheel for BO Motors RC Car 65 X 25 mm Approx
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim. High-quality wheels for coupling with BO-1, BO-2 type of DC motors. This wheel can be coupled to BO type motors by coupling it.
SKU: CE-M0167 -
Motor Drives & controllers, Robots & Kits
Geared Motor DC , 12V, Center Shift 10- 500 RPM
DC Motor – 10 to 500 RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
10 to 500 RPM 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
SKU: CE-GM
