Black Plastic Storage Box Case Holder For Battery 1x 18650 With Wire Leads Subtotal: ₹35.40 (incl. tax)
Circuits Boards & PCB, Tooles & Instruments
Glue Stick Hot Melt Glue Sticks 11×250 &125 mm
Availability:
Out of stock
Hot Melt Clear Glue Sticks.Glue stick that is compatible with almost all standard glue gun. Even stanley glue gun.Two sizes are avalable 10 inch & 5 Inch .you can buy it as per your requirment
Price range: ₹9.44 through ₹11.80 Price Including GST
CompareGlue Stick Hot Melt Glue Sticks
Two different sizes are available 5 & 10 Inch. Best For Your Projects.
Made with high-quality FR Grade material to prevent the damage and shock or sparking. Fire Resists materials are able to reduce the flow of heat through the thickness of the material.
Before Place this order please chose size as per your requirement
Based on 0 reviews
Be the first to review “Glue Stick Hot Melt Glue Sticks 11×250 &125 mm”
Related products
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
XL6009 DC- DC Adjustable Step UP Boost Converter Module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyXL6009 DC- DC Adjustable Step UP Boost Converter Module
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC
SKU: CE-M006 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC Buck Converter 5V3A USB Output Module
- – The max output current 3A, long time use 2.1A, enough use
- – New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
- – Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
- – Flat copper inductor, improve conversion efficiency
- – With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
- – Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
- – High quality USB port
- – Output voltage indicator (RED)
- – Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
- – Input with reverse polarity protection diode, will not damage when input connect incorrect
- – Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable
SKU: CE-M011 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
FT232RL FTDI USB to TTL Serial Adapter Module
Circuits Boards & PCB, Developments Boards, Modules & SensorsFT232RL FTDI USB to TTL Serial Adapter Module
Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
SKU: CE-M070
There are no reviews yet.