Developments Boards, Modules & Sensors
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR
Availability:
61 in stock
Product Description:
Infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products.
₹88.50 Price Including GST
61 in stock
CompareQUICK VIEW
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Specifications and Features :
- Color: Green, Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S
Based on 0 reviews
Be the first to review “HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR”
Related products
-
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & Kits
HC-06 Bluetooth serial pass-through module
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & KitsHC-06 Bluetooth serial pass-through module
This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.0+EDR standard. In Bluetooth 2.0, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth. This module is set with serial interface, which is easy to use and simplifies the overall design/development cycle.
SKU: CE-M048 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051
There are no reviews yet.