Lipo Battery Low Voltage Tester 1S-8S Buzzer
Out of stock
The LiPo low voltage Tester cum Alarm is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will go off with flashing LED if the voltage on any of the individual cells drops below the adjustable threshold. Essential while working with any Lithium Polymer battery.
₹152.22 Price Including GST
Out of stock
CompareFeatures:
* Low voltage Buzzer alarm mode for 2-8S.
* With a push key by which you can change the value settings and save.
* When voltage is below the set value, it will buzzer very loudly with red LED light. (pre-set value is 3.3V)
* Mini shape, no larger than a common key.
* Compact, easy to carry.
* Really useful in flight if you can’t see the lights.
* Use for 1-8s Lipo/Li-ion/LiMn/Li-Fe.
* Voltage detection precision: ±0.01V
* Unit voltage display range: 0.5-4.5V
* Total Voltage display Range: 0.5-36V
* 1S test mode voltage range: 3.7-30V
* 1S test mode detection precision: ±0.5%
How To use Click Bellow Button
Based on 0 reviews
Be the first to review “Lipo Battery Low Voltage Tester 1S-8S Buzzer”
Related products
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC Buck Converter 5V3A USB Output Module
- – The max output current 3A, long time use 2.1A, enough use
- – New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
- – Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
- – Flat copper inductor, improve conversion efficiency
- – With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
- – Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
- – High quality USB port
- – Output voltage indicator (RED)
- – Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
- – Input with reverse polarity protection diode, will not damage when input connect incorrect
- – Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable
SKU: CE-M011 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064
There are no reviews yet.