Out of stock
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to +700°C. The MAX6675 is available in a small, 8-pin SO package
₹227.74 ₹345.74 Price Including GST
Out of stock
MAX6675 Thermocouple Temperature Sensor
The chip does all the hard work for you, and all you do is connect up the thermocouple and read the output from the SPI interface!
Interface: SPI
Test Temperature Range: 0 ℃ ~ 1024 ℃, the converter temperature resolution is 0.25 ℃
Voltage Range: 3.0 ~ 5.5V
Current: 50mA
Operating Temperature Range: -20 ℃ ~ 85 ℃
Module Size: 15mm * 28mm, with a 3mm diameter screw holes
K type thermocouple junction location, use 301 ordinary terminals
Application: Industrial, Appliances, HVAC
For Tutorial Click Bellow Button
• 8 pin connector
• Adhesive mounting
• Maximum Circuit Rating: 35VDC, 100mA
• Insulation Resistance: 100M Omh, 100V
• Dielectric Withstand: 250VRms (50-60Hz, 1min)
• Contact Bounce: <=5ms
• Life Expectancy: 1 million closures
• Operation Temperature: 0 to 70 centigrade
• Humidity: 40 centigrade, 90%-95%, 240 hours
• Pad Size (L x W): Approx. 3 x 2.7 inch / 76 x 69 mm
• Flexible Circuit Length: Approx. 3.3 inch / 83 mm
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
The Keyes KY-040 rotary encoder is a rotary input device (as in knob) that provides an indication of how much the knob has been rotated AND what direction it is rotating in.It’s a great device for stepper and servo motor control. You could also use it to control devices like digital potentiometers..
Select at least 2 products
to compare
Li-Ion Rechargeable Battery Roofer 2200 mAh Original 
2-Channel 5V Relay Module With optocoupler For arduino & other 
There are no reviews yet.