Shop
Showing 76–90 of 621 results
-
Batteries
3300 mAh 26650 LifePO4 Battery Cell Rechargeable battery 3.2V
3.2V Rechargeable 33 00mAh LifePO4 Battery Cell Size 26650 . High-Quality Actual Capacity.
This Standard 26650 3.2V Rechargeable 3300mAh LifePO4 Battery Cell is a single cell powerful battery cell with a massive 3300 mAh capacity. This LifePO4 battery is very convenient to install in your project where 3.2 Volt with high capacity is needed.
The Standard 3000mAh 3.2V Rechargeable LifePO4 Battery is a source of power for various portable devices including flashlights, hobby transmitters, and receivers etc.
SKU: CE-21-00115 -
Capacitor, Components
3300uf / 25v Electrolytic Capacitor Good Quality Through Hole
ELECTROLYTIC CAPACITOR 3300uF 25V, Through Hole Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode—fixed Capacitor Application: Lighting Type: Electrolytic Capacitor Model Number: 3300uf 25V. An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a skinny layer of aluminum oxide as dielectric, and which has an electrolyte as its second electrode. Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their anodization principle. They can only be operated with DC voltage applied with the correct polarity.
SKU: CE-24-00187 -
Capacitor, Components
330uf / 25v Electrolytic Capacitor Good Quality
ELECTROLYTIC CAPACITOR 330uF 25V, Through Hole Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode—fixed Capacitor Application: Lighting Type: Electrolytic Capacitor Model Number: 330uf 25V. An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a skinny layer of aluminum oxide as dielectric, and has an electrolyte as its second electrode. Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their anodization principle. They can only be operated with DC voltage applied with the correct polarity.
SKU: CE-24-00185 -
Batteries, Batteries & Chargers
3350mAh 3.6V BAK Original 18650 3C Li-ion Battery
This product description is 100% real capacity voltage: 3.7VCapacity: 3350 mAh Size: 18mm x 65.0mmWeight: 48g /pcs Approx. Battery voltage: standardvoltage 3.6 / 3.7V, voltage overshoot after full power of 4.2V,when complete discharge voltage is 2.75V
Product Features: Safe and environmentally friendly. 100% Brand New and High-quality battery.18650 3.7V 3350 mah rechargeable Li-ion lithium battery.Product 100 genuine guaranteeSKU: CE-24-00181 -
Components
33uH 3A Inductor Choke 8/10 mm Premium Grade
33uH 8x10mm 3A Radial Leaded Power Inductor is a small choke coil power inductor. It has a wire wound on the core(magnetic or air), with leads attached to it for through-hole mounting. The power inductor is also known as a choke coil, choke, or differential mode inductor is used to limit the alternating current through the coil.It has a high Q factor, high self-resonance frequency, small magnetic flux leakage. Also, the power inductor has good magnetic shielding and is RoHS-free.
SKU: CE-20-00075 -
-
Batteries & Chargers, BMS
3S 10A 18650 Battery Charger BMS With Protection 11.1V
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board (BMS) ensures the security of battery pack. This battery management system design and Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage)
Note: Please allow 1-3mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Also, Note down and take care of following things while using 3S 11.1V 18650 Lithium battery protection board 12V 10A Overcharge And Overcurrent protection.
SKU: CE-M0155 -
Batteries & Chargers, BMS
3S 20A 12.6V Charger Pcb For Li-ion Lithium Battery BMS
The 3 Series 20A 18650 Lithium Battery Protection Board 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube.It provides continuous discharge of 20A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance)
SKU: CE-M0143 -
Batteries & Chargers, BMS
3S 40A Balance Charging 12.6V 18650 lithium battery BMS Board
Balanced version: for starting current below 80A, power 135W below the drill. balanced function.3S 12.6V 40A lithium battery protection board.Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery).Product Size: 42 * 57 * 3.4mm Balanced Version
SKU: CE-M0142 -
Batteries & Chargers, BMS
3S 40A BMS Board 12.6V 18650 lithium battery protection Board
Enhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function).3S 12.6V 40A lithium battery protection board.Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery).Product Size: 42 * 55 * 3.4mm (Standard Version / Enhanced Version),Product weight: 8.8g (standard / enhanced version),
SKU: CE-M0123 -
BMS
3S 5A 18650 BMS Lithium Battery 12.6V
The 3 Series 5A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube.
It provides a continuous discharge of 5A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.(if the cooling environment is not good, please reduce the load current use)
The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage
SKU: CE-23-00173 -
Developments Boards, Modules & Sensors
4 Channel Relay Module 5V with optocoupler
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be controlled directly by microcontroller.
SKU: CE-M0118 -
Capacitor, Components
4.7uf / 50v Electrolytic Capacitor Good Quality
ELECTROLYTIC CAPACITOR 4.7uF 50V, Through Hole Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode—fixed Capacitor Application: Lighting Type: Electrolytic Capacitor Model Number: 4.7uf 50V. An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a skinny layer of aluminum oxide as dielectric, and has an electrolyte as its second electrode. Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their anodization principle. They can only be operated with DC voltage applied with the correct polarity.
SKU: CE-24-00183
