TTP223 CAPACITIVE TOUCH MODULE
Out of stock
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Job type: the initial state is low, high touch, do not touch is low ( similar touch of a button feature ). A module can be installed in such as surface plastic, the glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons.
₹35.40 Price Including GST
Out of stock
CompareTTP223 CAPACITIVE TOUCH MODULE
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides direct mode toggle mode by pad option(TOG pin).
After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
Based on 0 reviews
Be the first to review “TTP223 CAPACITIVE TOUCH MODULE”
Related products
-
Developments Boards, Modules & Sensors
USB To TTL Converter RS232 CH340G Module Adapter
The CH340 series of chips are a full-speed USB device that emulates a standard serial interface, with speeds from 50bps to 2Mpbs.The chip supports 5V and 3.3V, selectable via a jumper (included).You can easily use it for serial communication to your MCUs (Arduinos,RPis,etc).Each Board is tested by our experts at Nexgen Gadgets before dispatching to ensure reliable & flawless working.
SKU: CE-M016 -
Developments Boards
ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
- internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!
- interface definition on the shell directly tagging, be clear at a glance, convenient and practical!
- 5 V, 3.3 V available at the same time, convenient for you to link the 5 V and 3.3 V target board
- shell characters using laser laser, laser engraving, never fade off! Permanent clear!
- internal motherboard with 500 ma self recovery fuse, completely protect your expensive computer motherboard!
- The LED indicator light, convenient you always observes the working state of the ST cc-link V2!
- Distribution 4 with dupont line, let you can easily cope with different target plate line order!
- Use anti-static bag packaging, automatic sealing machine sealed packaging, safe and reliable, does not fear the electrostatic, not afraid of water!
SKU: CE-P001 -
Developments Boards, Modules & Sensors
HUMIDITY DETECTION SENSOR MODULE HR202 LM393
HR202 is a new kind of humidity-sensitive resistor made from organic macromolecule materials, it can be used in occasions like: hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.
SKU: CE-M008 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001
There are no reviews yet.