1602 Blue LCD Module HD44780 16×2 Displays Characters
Out of stock
This is 1602 LCD module. Which can display 16 characters 2 lines. This is very most used LCD module best for you project . It’s easily convert II2c just use one module
₹123.90 Price Including GST
Out of stock
Compare1602 Blue LCD Module HD44780 16×2 Displays Characters Blue
Features:
* 100% Brand New and High Quality Product
* It is a best output device to show information with bright display with 2 lines and 16 character.
* Wide viewing angle and High contrast
* blue backlight
* Built in HD44780 controller
* 5X8 and 5X10 dot matrix possible
* 4-bit or 8-bit MPU interface enabled
* 80 X 8 bit display RAM (80 characters max.)
* Working Voltage : 5V
Based on 0 reviews
Be the first to review “1602 Blue LCD Module HD44780 16×2 Displays Characters”
You may also like…
-
Display Module
OLED 0.96″ Display Module I2C Display 128X64 OLED
Three different colour types available Please make specify before place order
This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
SKU: n/a
Related products
-
Developments Boards, Modules & Sensors
TTP223 CAPACITIVE TOUCH MODULE
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Job type: the initial state is low, high touch, do not touch is low ( similar touch of a button feature ). A module can be installed in such as surface plastic, the glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons.
SKU: CE-M0106 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062 -
Developments Boards, Display Module
MAX 7219 8X8 dot matrix module LED For Arduino & other
This product is a serially driven 8×8 LED Matrix which powered by MAX7219.The 8×8 LED Matrix is easy to use and compatible with Arduino, only needs three data lines and two power lines. It can be used in lots of place like various types of electronic display panels. You can make your applications more vivid because of the LED brightness adjustment can be implemented in software. For the kit of this module
SKU: CE-M015 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Joystick Module Dual Axis XY for arduino & other
Circuits Boards & PCB, Developments Boards, Modules & SensorsJoystick Module Dual Axis XY for arduino & other
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
SKU: CE-M096
There are no reviews yet.