Out of stock
Suitable for Arduino main board which include the Arduino Uno and Arduino Leonardo. The 1602 LCD Board Keypad Shield is sometimes called navigation shield because it comes with 6 momentary push buttons for menu navigation. Besides the push button, it also includes a 2×16 LCD.This is a very popular LCD Keypad shield for Arduino and other variants. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. The onboard LED indicates power on.
Note: You need to turn the on-board Potentiometer (blue color) to adjust screen contrast.
₹207.68 Price Including GST
Out of stock
Features :
The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
It consists of a 1602 white character blue backlight LCD.
The keypad consists of 6 keys select, up, right, down, left and reset.
To save the digital IO pins, the keypad interface only uses one ADC channel.
The key value is read out through a 5 stage voltage divider.
Package Includes :
1 x 1602 LCD Board Keypad Shield
TTP226 8-Way Capacitive Touch Sensor / Switch Module is based on a touch-sensing IC enabling capacitive touch switch mode. In the normal state, the module output is low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
Nokia 5110 LCD Display Module is a low-cost monochrome LCD module comprised of 84 X 48 pixels that can be used to display rich graphic and text content. Though it’s an industrial module, this LCD display is extremely easy to use. This module is a revision that accepts 3-5V input. So no extra level shifter is needed. To have full control, you just need 5 pins. And as a classic display module among open source communities,
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
Select at least 2 products
to compare
COB LED Light 2.4W injection Module 12V waterproof yellow 
Black Plastic Storage Box Case Holder For Battery 1x 18650 With Wire Leads 
USB To TTL Converter RS232 CH340G Module Adapter 
There are no reviews yet.