7.4V 2200 Mah lithium-ion battery Pack inbuilt BMS protection
18 in stock
7.4V 2200 Mah lithium-ion battery Pack inbuilt BMS protection. When this Battery fully Charged it can deliver up to 8.4V. BMS Circuit already inside this battery pack for protection. Actual Capacity
₹424.80 Price Including GST
18 in stock
Compare7.4V 2200 Mah lithium-ion battery Pack inbuilt BMS protection
Description:-
Very Small in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries
Discharge current up to 2.2A
Full Charge in 40 to 90 minutes depending upon the special charger
Long life with full capacity for up to 1000 charge cycles
2X Li-ion 3.7V 2200mAh cells (2S1P) Full charge Voltage 8.4 (Approx)
Low maintenance
Dimensions : 65 x 36 x 18 mm (Approx)
SkyCell Li-Ion Cell Specifications
Â
7.4 V 2200mAh
Weight 100 grams (Approx)
Maximum safe discharge current 2200mA
Maximum charging current 2200mA
Specification
Charging Voltage- 8.4V
Charging Current- 1A
Nominal Pack Voltage- 7.4V
Discharge Current- Tested for 500mA, 1A, 2A
Max. Discharge current – 2A
Protection (Included BMS)
Short Circuit Protection
Upper charge cut-off threshold: 8.4V
Lower cutoff threshold: 5.5V
Applications:
Small-scale UPS Battery
Battery for GPS Tracking – Vehicle Tracking – Asset Tracking
Wifi Modem or Router Battery for backup
PSP
Industrial Machines
Emergency Lights
Robotics and RC cars
Music Players and Audio Systems
Â
Based on 0 reviews
Be the first to review “7.4V 2200 Mah lithium-ion battery Pack inbuilt BMS protection”
You may also like…
Related products
-
Heat Shrink Sleeves
PVC Heat Shrink Sleeve 93mm For Battery Pack 1M
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
SKU: CE-BHST-95 -
Heat Shrink Sleeves
PVC Heat Shrink Sleeve 33mm For Battery Pack 1M Blue
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
SKU: CE-BHST-33-1 -
Batteries, Batteries & Chargers, Toys , RC Plane & Drone
2200 mAH 3S 40C Lithium polymer battery Pack 11.1V
Batteries, Batteries & Chargers, Toys , RC Plane & Drone2200 mAH 3S 40C Lithium polymer battery Pack 11.1V
The H2 Transmitter (Tx) 11.1V / 2200mAh 3S 40C LiPo battery pack with XT60 connector is equipped with less discharge are used for the various remote controls and microcontrollers. The H2 Transmitter (Tx) 11.1V / 2200mAh 3S 40C LiPo battery pack with XT60 connector have a JST-XH style balance connectors. All Orange Lithium Polymer batteries packs are assembled using IR matched cells. Orange batteries are known for performance, reliability and optimum price also.
It is not surprising to us that H2 Lithium polymer packs are the go-to pack for those in the know. H2 batteries deliver the full rated capacity at a price everyone can afford. The H2Transmitter (Tx) 11.1V / 2200mAh 3S 40C LiPo battery pack have a matched resistance and the true balance. These Orange batteries have a good temperature control.
SKU: CE-B-11.1-2200 -
Heat Shrink Sleeves
65mm PVC Heat Shrink Sleeve For Battery Pack 1M
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
SKU: CE-BHST-65
There are no reviews yet.