Battery Shield For WeMos D1 mini battery Charging and Boost
25 in stock
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
₹234.82 ₹318.60 Price Including GST
25 in stock
CompareBattery Shield For WeMos D1 mini battery Charging and Boost
Specification
- Charging Voltage: 10V MAX 5V Recommended
- Charging Current: 1A
- Lithium Battery Voltage: 3.3-4.2V
- Boost Power Supply: 5V (Max 1A)
Ports:
- XH2-2.54mm (Port 1): Connect to lithium battery (3.3-4.2V)
- Micro USB: Charging Port (5V)
- Green LED: Illuminates when charging is complete
- Red LED: Illuminates when charging is in progress
- J1: Sets the maximum charging current: 0.5A or 1A
Based on 0 reviews
Be the first to review “Battery Shield For WeMos D1 mini battery Charging and Boost”
You may also like…
Related products
-
Developments Boards, IoT & Wireless, Modules & Sensors
HC-05 Bluetooth RF Transceiver Module serial RS232 TTL
Developments Boards, IoT & Wireless, Modules & SensorsHC-05 Bluetooth RF Transceiver Module serial RS232 TTL
To setup Wireless Serial Communication, HC-05 Bluetooth Module is most demanding and popular due to its low price and extremely high features.This module can be used in Master or Slave Mode and easy switchable between these two modes, By default Slave mode is configured.
Modes can be changed using AT Commands.The slave mode in HC-05 cannot initiate a connection to another Bluetooth device, but can accept connections.Master mode can initiate a connection to other devices.
SKU: CE-W003 -
IoT & Wireless, Modules & Sensors
NodeMcu ESP8266 V3 with CP2102
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language.
SKU: CE-W002 -
IoT & Wireless
ESP32S Wroom Wireless Wifi Bluetooth Module Adapter Plate
The ESP32 is a very powerful Wifi and Bluetooth module but difficult to work with due to its small size and many available pins. The pins are extremely close to each other and nearly impossible to solder wires to it.
SKU: CE-W012-1 -
There are no reviews yet.