49 in stock
Buck Step Down Power Supply PCB Only. FR-4 glass epoxy Board. For LM2576 Voltage Regulator IC
₹23.60 Price Including GST
49 in stock
CompareHigh-Quality Glass E Poxy PCB
Printed Board with Backside Tinning
size 6.8cmX 3cm
It is generally used in the welding of battery points together to connect the batteries in combinations. These Nickel strips are popular because of their good performance while soldering as it gets soldered very quickly and easily with normal soldering metal with High tensile tension and Low resistivity.
They are mainly used in the manufacture of nickel-hydrogen batteries, lithium batteries, high magnification power tools batteries, laptop batteries, battery combination with HM.
Touch Control Sensor Switch for Mirror Light can be powered by simply supplying a 12VDC. It has a switch control function to light up LED lights from a single touch. The product is specially designed for smart light mirrors. It is suitable for the control of two mirror lights, single touch switch controls both the LED’s one after the other, which means on the first touch the LED connected with blue wire will glow. On the second touch, the LED connected with white wire will glow and on the third touch both the LED’s will glow together. The fourth touch switches off both the LEDs. The module has a feature to control the brightness of both the LED strips. The touch switch has a feature of backlight, according to this as the power gets supplied to the module the touch switch starts glowing white and whenever the LED is switched on the white Colour changes to blue. INPUT gets connected to the input 12VDC supply to power the module. OUTPUT gets connected to two LED strips. The positive wire(red coloured ) will be common for both LED strips and the other two negative wires(blue and white-coloured) will get connected with the negative of both the LED strips. The LED’s intensity can be controlled by touching continuously the touch switch, it goes from bright to dim then removing the finger and placing it again, it goes from dim to bright. Both the LED strip’s intensity can be altered, either when the single LED is glowing or while both the LEDs are glowing.
12V DC Solenoid Water Air Valve Switch (Normally Closed) 1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage is removed. Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value). It is not suitable for use with Gravity-fed systems
This is a good quality Single Sided Glass Epoxy FR4 PCB board. It is also known as Copper Clad Board with 1-Sided Glass Epoxy. This board can be used to build your own circuit boards, breakout boards, DIY board, and other Industrial boards and applications. This board is made of high-quality Glass Epoxy laminate and has the size of 6X4 inches.
Select at least 2 products
to compare
Sound Detection sensor Module For Arduino & other 
3.7V 600mAh 14500 Lithium-Ion AA Battery Flat Head 
Nickel Strip 5M 0.12x5mmx5m Pure Nickel 
There are no reviews yet.