Dust Smoke Particle Sensor GP2Y1010AU0F
3 in stock
GP2Y1010AU0F Module is used to Sense Dust Particles in air and also called as an optical air quality sensor. It is very much smaller in size. It detects the reflected light of dust in the air. Especially, it is effective to detect very fine particle like cigarette smoke. In addition, it can distinguish smoke from house dust by pulse pattern of output voltage and is commonly used in air purifier systems. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.
₹483.80 Price Including GST
3 in stock
CompareDust Smoke Particle Sensor GP2Y1010AU0F
Dust Smoke Particle Sensor QUICK OVERVIEW
Power supply voltage: DC5 ± 2V
Sensitivity: 0.5V / (0.1mg / m3)
The minimum detection level of particles: 0.8 m
Clean air voltage: 0.9V typ.
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
Based on 0 reviews
Be the first to review “Dust Smoke Particle Sensor GP2Y1010AU0F”
Related products
-
Developments Boards, Modules & Sensors
USB To TTL Converter RS232 CH340G Module Adapter
The CH340 series of chips are a full-speed USB device that emulates a standard serial interface, with speeds from 50bps to 2Mpbs.The chip supports 5V and 3.3V, selectable via a jumper (included).You can easily use it for serial communication to your MCUs (Arduinos,RPis,etc).Each Board is tested by our experts at Nexgen Gadgets before dispatching to ensure reliable & flawless working.
SKU: CE-M016 -
Developments Boards, Modules & Sensors
Rotary Encoder Module Brick Sensor arduino KY-040
The Keyes KY-040 rotary encoder is a rotary input device (as in knob) that provides an indication of how much the knob has been rotated AND what direction it is rotating in.It’s a great device for stepper and servo motor control. You could also use it to control devices like digital potentiometers..
SKU: CE-M049 -
Modules & Sensors
BMP280 Pressure Sensor Module High Precision Atmospheric
- Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
- This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
SKU: CE-M036 -
Developments Boards, Modules & Sensors
TTP226 8-way touch module Capacitive touch switch digital touch sensor
Developments Boards, Modules & SensorsTTP226 8-way touch module Capacitive touch switch digital touch sensor
TTP226 8-Way Capacitive Touch Sensor / Switch Module is based on a touch-sensing IC enabling capacitive touch switch mode. In the normal state, the module output is low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
SKU: CE-M055
There are no reviews yet.