-
×
FT232RL FTDI USB to TTL Serial Adapter Module
1 × ₹265.50
Subtotal: ₹265.50 (incl. tax)
Developments Boards, Modules & Sensors
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR
Availability:
61 in stock
Product Description:
Infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products.
₹88.50 Price Including GST
61 in stock
CompareQUICK VIEW
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Specifications and Features :
- Color: Green, Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S
Based on 0 reviews
Be the first to review “HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR”
Related products
-
Developments Boards, Modules & Sensors
16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
Developments Boards, Modules & Sensors16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
• 8 pin connector
• Adhesive mounting
• Maximum Circuit Rating: 35VDC, 100mA
• Insulation Resistance: 100M Omh, 100V
• Dielectric Withstand: 250VRms (50-60Hz, 1min)
• Contact Bounce: <=5ms
• Life Expectancy: 1 million closures
• Operation Temperature: 0 to 70 centigrade
• Humidity: 40 centigrade, 90%-95%, 240 hours
• Pad Size (L x W): Approx. 3 x 2.7 inch / 76 x 69 mm
• Flexible Circuit Length: Approx. 3.3 inch / 83 mmSKU: CE-M032 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Joystick Module Dual Axis XY for arduino & other
Circuits Boards & PCB, Developments Boards, Modules & SensorsJoystick Module Dual Axis XY for arduino & other
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
SKU: CE-M096 -
Developments Boards, Modules & Sensors
MQ7 – Carbon Monoxide Gas Sensor Module
This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5V.
SKU: CE-M078
There are no reviews yet.