MAX6675 Module With K Type Thermocouple Sensor
2 in stock
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to +700°C. The MAX6675 is available in a small, 8-pin SO package
₹352.82 ₹470.82 Price Including GST
2 in stock
CompareMAX6675 Module With K Type Thermocouple Sensor
The chip does all the hard work for you, and all you do is connect up the thermocouple and read the output from the SPI interface!
Interface: SPI
Test Temperature Range: 0 ℃ ~ 1024 ℃, the converter temperature resolution is 0.25 ℃
Voltage Range: 3.0 ~ 5.5V
Current: 50mA
Operating Temperature Range: -20 ℃ ~ 85 ℃
Module Size: 15mm * 28mm, with a 3mm diameter screw holes
K type thermocouple junction location, use 301 ordinary terminals
Application: Industrial, Appliances, HVAC
Package Include
1 X Max6675 Module
1X K Type Thermocouple Sensor
5x Jumper Wire Female To Female
For Tutorial Click Bellow Button
Based on 0 reviews
Be the first to review “MAX6675 Module With K Type Thermocouple Sensor”
Related products
-
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001 -
Developments Boards, Modules & Sensors
USB ASP ISP Programmer for 8051
USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed, and thats make it low cost USB programmer.
The Programmer works on USB port and can be used with Laptops. Software is compatible with Windows Vista and Windows 7. High speed programming and does’t require external power.
SKU: CE-P002 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051 -
Developments Boards, IoT & Wireless, Modules & Sensors
HC-05 Bluetooth RF Transceiver Module serial RS232 TTL
Developments Boards, IoT & Wireless, Modules & SensorsHC-05 Bluetooth RF Transceiver Module serial RS232 TTL
To setup Wireless Serial Communication, HC-05 Bluetooth Module is most demanding and popular due to its low price and extremely high features.This module can be used in Master or Slave Mode and easy switchable between these two modes, By default Slave mode is configured.
Modes can be changed using AT Commands.The slave mode in HC-05 cannot initiate a connection to another Bluetooth device, but can accept connections.Master mode can initiate a connection to other devices.
SKU: CE-W003
There are no reviews yet.