MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
113 in stock
MT3608 2A Max DC-DC Step Up Power Module Booster
Specifications:
2V to 24V input voltage with output boost 5V to 28V adjustable
Maximum output current: 2A
Input voltage: 2V ~ 24V
Maximum output voltage: > 5V – 28V
Efficiency: > 93%
Input voltage should not exceed the maximum input voltage
Peak current output current should not more than 2A
Output voltage should always be higher than Input voltage
PCB Size: 36 mm * 17 mm * 14 mm
₹82.60 Price Including GST
113 in stock
CompareMT3608 2A Max DC-DC Step Up Power Module Booster Power Module
The method of use
Connect the the IN+ and IN- of the module with 2~24v
Adjust the potentiometer to adjust the output voltage. Please be noted that the output voltage should be higher than the input voltage.
Note:
1).The input voltage should not exceed the maximum input voltage
2).Peak current output current is not more than 2A for input & output.
Test comparison sample reference:
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin * Iin * Efficiency = Vout * Iout
Based on 0 reviews
Be the first to review “MT3608 2A Max DC-DC Step Up Power Module Booster Power Module”
You may also like…
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC 3V to 5V USB OUTPUT STEP UP POWER MODULE
Batteries & Chargers, Circuits Boards & PCB, Power SupplyDC 3V to 5V USB OUTPUT STEP UP POWER MODULE
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
SKU: CE-M018
Related products
-
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors
0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
Batteries & Chargers, Circuits Boards & PCB, Modules & Sensors0.36 Inch DC 0-100V LED Mini Digital Voltmeter Blue/red/green Volt Meter 3 wires
- this voltmeter uses three-position 0.36inch LED digital tube display, no shell, thin thickness, small appearance, low price, stable performance and good display.
- The measuring range of the voltmeter can be DC 0-100V. The working power supply should be supplied by the outside, the voltage range is DC 4.5-30V, and the protection will be received.
- The display resolution of this voltmeter is fixed to 0.1V.
- This voltmeter is suitable for users with DC power supply to save cost. Or you need to start measuring from 0V
SKU: n/a -
Batteries & Chargers, Circuits Boards & PCB
5V 1A 2.1A Mobile Power Bank PCB 18650 Battery Charger Module with LCD
Batteries & Chargers, Circuits Boards & PCB5V 1A 2.1A Mobile Power Bank PCB 18650 Battery Charger Module with LCD
This is the mobile power module Accessories, 18650 Circuit board shell.
Meet the individual needs of your DIY, but you must understand basic electronic assembly.
Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection.
Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge.
Output voltage and current stable, will not harm user devices.SKU: CE-M010 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064
There are no reviews yet.