PAM8403 5V Stereo Audio Amplifier Board
Out of stock
The PAM8403 5V Two-channel Stereo is a 3W+3W, class-D audio amplifier. Allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area. With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications.
₹59.00 Price Including GST
Out of stock
ComparePAM8403 5V Dual-channel Stereo Mini Class-D 3W+3W Audio Amplifier Board
Operating Voltages : 2.5V – 5.5V.PAM 8403 audio Amplifier board
Current capacity : 8 mA PAM 8403 audio Amplifier board
Efficiency : 87 % PAM 8403 audio Amplifier board
Amplifier IC: PAM 8403 audio Amplifier board
Load : Can direct drive 4 or 8 ohm small speakers PAM 8403 audio Amplifier board
Dimensions : 21 x 18 x 3 mm.
Weight : 5 gm.
Max Gain : 24 dB.
Signal to Noise ratio : 80 dB.
Power supply Rejection ratio : -58 dB.
Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load).
Good sound quality.
Double panel wiring solves crosstalk.
Super mini design allows it to be easily placed in a variety of digital products.
3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
Filterless, Low Quiescent Current and Low EMI.
Superior Low Noise.
Short Circuit Protection.
Thermal Shutdown
Based on 0 reviews
Be the first to review “PAM8403 5V Stereo Audio Amplifier Board”
You may also like…
-
Circuits Boards & PCB, Home & Audio
PAM 8403 audio board with volume controller
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf (some sellers are less did not even 100uf capacitance) 1.6mm glass sheet, the real amplifier board did the most detailed, high-fidelity sound output 3W + 3W, is a rare good product enthusiasts amplifier, potentiometer using original anti-meter body, life expectancy up to 15 years, potentiometer with switch can cut off the power supply directly counter clockwise, Listing has been received by the buyer!
SKU: CE-M058 -
-
Related products
-
Circuits Boards & PCB, Components, Holders Wire connector Cables & Screw
40 Pin male header Burge Strip Single Row / Double Row / L-type
Circuits Boards & PCB, Components, Holders Wire connector Cables & Screw40 Pin male header Burge Strip Single Row / Double Row / L-type
High Quality 40 pins 2.54mm male connector . You can get varieties & buy as per your requirement. It can be cut any size easily any size as per your necessity. Single Row Straight / Double row Straight / L type etc.
If you face any issue like payment fail or buying problem Please contact us Call Or Whatsapp :- + 91 9830150448
SKU: 4 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001 -
Batteries & Chargers, Circuits Boards & PCB
TP4056 Micro USB 1A 18650 Lithium Battery Charger Module
The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module has on-board Micro USB interface. With Micro-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
SKU: CE-M029-W
There are no reviews yet.