Robot Wheel for BO Motors RC Car 65 X 25 mm Approx
Out of stock
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim. High-quality wheels for coupling with BO-1, BO-2 type of DC motors. This wheel can be coupled to BO type motors by coupling it.
₹34.22 Price Including GST
Out of stock
CompareRobot Wheel for BO Motors RC Car 65 X 25 mm Approx
Specifications Robot Wheel for BO Motors
Loading Capacity (Kg)-2.5
D hole For BO Motor 6 mm
Weight (gm) 34
Wheel Diameter(mm) 65 mm
ColorBlack (Tyre) Yellow (Rim)
Wheel Width 27 mm
Body Material Plastic
Grip Material Rubber
Center Shaft Hole Diameter
5.4mm-(round side) and 3.5mm-(flat side)
Based on 0 reviews
Be the first to review “Robot Wheel for BO Motors RC Car 65 X 25 mm Approx”
You may also like…
-
Motor Drives & controllers, Robots & Kits
Dual Shaft BO Motor-Straight 300 RPM
Dual shaft DC motor with gear box which gives good torque and rpm at lower voltages. This motor can run at approximately 200rpm when driven by a Dual Li-Ion cell battery at 6 V and approximately at 300 rpm when driven by a 9V Li-Ion cell.It is most suitable for light weight robot running on small voltage. Out of its two shafts one shaft can be connected to wheel, other can be connected to the position encoder.
SKU: CE-M0134
Related products
-
Toys , RC Plane & Drone
BLDC Brushless Motor – A2212/13T 1000KV
A2212 is a brushless outrunner DC motor specifically made to power Quadcopters and Multirotors. It is a 1000kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
SKU: CE-BLDC-1000 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062
There are no reviews yet.