Solenoid Valve DC 12V DC 0.5″Inch Water Air
8 in stock
12V DC Solenoid Water Air Valve Switch (Normally Closed) 1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage is removed. Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value). It is not suitable for use with Gravity-fed systems
₹295.00 Price Including GST
8 in stock
CompareSolenoid Valve DC 12V DC 0.5″Inch Water Air
Features:
Compact and convenient.
Easily installed and serviced
Precise and reliable.
The installation direction can be arbitrary Angle
Pressure-regulating valve (steady flow valve) function similar to the water flow switch
Not only can it provide a steady flow, but it also prevents dry burning.
Suitable for fluids like water, oil, air.
Package Includes:
1 x 12V Solenoid Water Air Valve Switch (Normally Closed) 1/2
Specifications:
Model 12V DC 1/2″ Solenoid Valve
Rated Operating Voltage (VDC) 12
Rated Current (mA) 600
Operation Mode Normally Closed
Power Consumption (Watt) 8
Pressure 0.02- 0.5Mpa
Energized forms Intermittent
Inlet and outlet Diameter Hose barbs for 1/2″ (outer diameter) hose
Dimensions (mm) LxWxH Body: 84 x 57mm (L x H)
Coil size: 34 x 23mm (W x H)
Weight (gm) 100
Max fluid temperature 100C
Based on 0 reviews
Be the first to review “Solenoid Valve DC 12V DC 0.5″Inch Water Air”
You may also like…
-
Uncategorized, Circuits Boards & PCB, Tooles & Instruments
Mini Water Pump Submersible Pump DC 3-6 V
Mini DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.
SKU: CE-T042 -
Related products
-
Tools & DIY
170 Points Breadboard Solderless SYB-170 Mini
This170 Points Mini Breadboard SYB-170 Green is best for your small Arduino Projects.
The 170 Points breadboard is named for its 170 tie points. It has 17 columns of 10 holes, which are separated into two pairs by a central notch, and labeled 1 to 17. It comes with the adhesive back for easy attachment with the application.They’re useful for basic prototyping. They are the modern breadboards, a plug-and-play way to make connections between electronic components.
SKU: CE-21-00109 -
-
Tools & DIY
Touch Switch Mirror For Lighting 12V 3A
Touch Control Sensor Switch for Mirror Light can be powered by simply supplying a 12VDC. It has a switch control function to light up LED lights from a single touch. The product is specially designed for smart light mirrors. It is suitable for the control of two mirror lights, single touch switch controls both the LED’s one after the other, which means on the first touch the LED connected with blue wire will glow. On the second touch, the LED connected with white wire will glow and on the third touch both the LED’s will glow together. The fourth touch switches off both the LEDs. The module has a feature to control the brightness of both the LED strips. The touch switch has a feature of backlight, according to this as the power gets supplied to the module the touch switch starts glowing white and whenever the LED is switched on the white Colour changes to blue. INPUT gets connected to the input 12VDC supply to power the module. OUTPUT gets connected to two LED strips. The positive wire(red coloured ) will be common for both LED strips and the other two negative wires(blue and white-coloured) will get connected with the negative of both the LED strips. The LED’s intensity can be controlled by touching continuously the touch switch, it goes from bright to dim then removing the finger and placing it again, it goes from dim to bright. Both the LED strip’s intensity can be altered, either when the single LED is glowing or while both the LEDs are glowing.
SKU: CE-23-00159
There are no reviews yet.