-
×
TPA3110 Stereo Amplifier Board 2X15W Digital Audio
1 × ₹350.46 -
×
FT232RL FTDI USB to TTL Serial Adapter Module
1 × ₹265.50
Subtotal: ₹615.96 (incl. tax)
Developments Boards, Modules & Sensors
Compare
TTP223 CAPACITIVE TOUCH MODULE
Availability:
Out of stock
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Job type: the initial state is low, high touch, do not touch is low ( similar touch of a button feature ). A module can be installed in such as surface plastic, the glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons.
₹35.40 Price Including GST
Out of stock
Receive in-stock notifications for this.
TTP223 CAPACITIVE TOUCH MODULE
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides direct mode toggle mode by pad option(TOG pin).
After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
Based on 0 reviews
Be the first to review “TTP223 CAPACITIVE TOUCH MODULE”
Related products
-
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Joystick Module Dual Axis XY for arduino & other
Circuits Boards & PCB, Developments Boards, Modules & SensorsJoystick Module Dual Axis XY for arduino & other
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
SKU: CE-M096 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062 -
Developments Boards, Modules & Sensors
MQ7 – Carbon Monoxide Gas Sensor Module
This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5V.
SKU: CE-M078
There are no reviews yet.