Shop
Showing 556–570 of 621 results
-
Holders Wire connector Cables & Screw
Micro JST 1.25 2 PIN Male & Female Plug Connector
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily.
SKU: CE-T036-1 -
Developments Boards, Modules & Sensors
Micro SD Card Module for arduino & other
The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, MCU to complete the file system to read and write MicroSD card. Users can directly use IDE comes with an SD card to complete the library card initialization and read-write
SKU: CE-M045 -
Holders Wire connector Cables & Screw
Micro USB OTG 2.0 Hug Converter OTG Adapter
USB On-The-Go, often abbreviated to USB OTG or just OTG, is a specification first used in late 2001 that allows USB devices, such as tablets or smartphones, to act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mice or keyboards, to be attached to them.
SKU: CE-OTG -
Developments Boards, Home & Audio, Modules & Sensors
Mini MP3 player module TF Card U Disk
Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48. 24-bit DAC output, support dynamic range: 90dB, SNR support: 85dB. Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes NORFLASH. A variety of control modes are available. IO control, serial port, AD button control mode. Radio spots language function, you can pause the background music being played. Advertising finished playing background sound continues to play back
SKU: CE-M094 -
Circuits Boards & PCB, Home & Audio
MP3 USB FM Bluetooth with Remote Circuit
FM radio,· USB MP3 PLAY,· SD MP3 PLAY,· Remote operated, Led display, 5v operated.This type of ready-made MP3-FM kits With Bluetooth support.low cost .The kit consists of one main board, one connector wire, one USB socket+wire, one remote with battery.
SKU: CE-M098 -
Developments Boards, Modules & Sensors
MPU6050 GY-521 Gyroscope Module 3 Axis analog gyro sensors+ Accelerometer
Developments Boards, Modules & SensorsMPU6050 GY-521 Gyroscope Module 3 Axis analog gyro sensors+ Accelerometer
GY-521 MPU6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module, MPU-6050 3 Axis Gyroscope Module For Arduino A 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor.MPU6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module Easy to get it fit into your project!
SKU: CE-M033 -
Developments Boards, Modules & Sensors
MQ-5 LPG Liquid Propane Methane Gas Sensor Module
Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer
SKU: CE-M093 -
Developments Boards, Modules & Sensors
MQ7 – Carbon Monoxide Gas Sensor Module
This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5V.
SKU: CE-M078 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyMT3608 2A Max DC-DC Step Up Power Module Booster Power Module
MT3608 2A Max DC-DC Step Up Power Module Booster
Specifications:
2V to 24V input voltage with output boost 5V to 28V adjustable
Maximum output current: 2A
Input voltage: 2V ~ 24V
Maximum output voltage: > 5V – 28V
Efficiency: > 93%
Input voltage should not exceed the maximum input voltage
Peak current output current should not more than 2A
Output voltage should always be higher than Input voltage
PCB Size: 36 mm * 17 mm * 14 mm
SKU: CE-M026 -
IoT & Wireless, Modules & Sensors
NEO6MV2 GPS Module NEO-6M with Flight Control EEPROM
This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.
The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.
SKU: CE-M0110 -
IoT & Wireless, Modules & Sensors
NodeMcu ESP8266 V3 with CP2102
NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language.
SKU: CE-W002 -
Developments Boards, Display Module
Nokia 5110 LCD Module Blue Back light Adapter for Arduino
Nokia 5110 LCD Display Module is a low-cost monochrome LCD module comprised of 84 X 48 pixels that can be used to display rich graphic and text content. Though it’s an industrial module, this LCD display is extremely easy to use. This module is a revision that accepts 3-5V input. So no extra level shifter is needed. To have full control, you just need 5 pins. And as a classic display module among open source communities,
SKU: CE-M038-1
