Subtotal: ₹88.50 (incl. tax)
Developments Boards, Modules & Sensors
4 Channel Relay Module 5V with optocoupler
Availability:
30 in stock
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be controlled directly by microcontroller.
₹177.00 Price Including GST
30 in stock
Compare4 Channel Relay Module 5V with optocoupler
4 Channel Relay Module Pin Description
Input:
VCC: Positive supply voltage
GND: Ground
IN1–IN4: Relay control port
Output:
Connect a load, DC 30V/10A，AC 250V/10A
Features：
- Size: 75mm (Length) * 55mm (Width) * 19.3mm (Height)
- Weight: 61g
- PCB Color: Blue
- There are four fixed screw holes at each corner of the board, easy for install and fix. The diameter of the hole is 3.1mm
- High quality Songle relay is used with single pole double throw, a common terminal, a normally open terminal, and a normally closed terminal
- Optical coupling isolation, good anti-interference.
- Closed at low level with indicator on, released at high level with indicator off
- VCC is system power source, and JD_VCC is relay power source. Ship 5V relay by default. Plug jumper cap to use
- The maximum output of the relay: DC 30V/10A, AC 250V/10A
Based on 0 reviews
Be the first to review “4 Channel Relay Module 5V with optocoupler”
You may also like…
-
Modules & Sensors
Single Channel relay module 5V with Optocoupler
Single Channel relay module 5V with Optocoupler. This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine.
SKU: CE-M051-1 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051
Related products
-
Developments Boards, IoT & Wireless, Modules & Sensors
HC-05 Bluetooth RF Transceiver Module serial RS232 TTL
Developments Boards, IoT & Wireless, Modules & SensorsHC-05 Bluetooth RF Transceiver Module serial RS232 TTL
To setup Wireless Serial Communication, HC-05 Bluetooth Module is most demanding and popular due to its low price and extremely high features.This module can be used in Master or Slave Mode and easy switchable between these two modes, By default Slave mode is configured.
Modes can be changed using AT Commands.The slave mode in HC-05 cannot initiate a connection to another Bluetooth device, but can accept connections.Master mode can initiate a connection to other devices.
SKU: CE-W003 -
Developments Boards, Modules & Sensors
TTP226 8-way touch module Capacitive touch switch digital touch sensor
Developments Boards, Modules & SensorsTTP226 8-way touch module Capacitive touch switch digital touch sensor
TTP226 8-Way Capacitive Touch Sensor / Switch Module is based on a touch-sensing IC enabling capacitive touch switch mode. In the normal state, the module output is low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
SKU: CE-M055 -
-
Developments Boards, Display Module
4 Bits Digital Tube LED Display Module Clock Display TM1637
The 4 Bits Digital Tube LED Display TM1637 module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube.
SKU: CE-D005
There are no reviews yet.