72 in stock
Automatic Solar Light With Battery. It can automatically turn on the nighttime (Low light) and turn on day time. No need to operate it manually. It can also charge with an external Mirco USB port. Very useful as a garden light. Original lithium battery used. You can also customize it as per your ideas
₹392.00 ₹531.00 Price Including GST
72 in stock
CompareAutomatic Solar Light With Lithium Battery & Solar Cell
Features:-
Note:- you can choose LED module Colour (RED, Green., Blue, Warm White & White ) . We supply warm white by default. After Placing an order please WhatsApp us (+91 9830150448) for additional LED modules if you need the price of INR 25 per module.
| Weight | 250 g |
|---|
Automatic Solar Light With Battery. It can automatically turn on the nighttime (Low light) and turn on day time. No need to operate it manually. It can also charge with an external Mirco USB port. Very useful as a garden light. Original lithium battery used. You can also customize it as per your ideas
Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf (some sellers are less did not even 100uf capacitance) 1.6mm glass sheet, the real amplifier board did the most detailed, high-fidelity sound output 3W + 3W, is a rare good product enthusiasts amplifier, potentiometer using original anti-meter body, life expectancy up to 15 years, potentiometer with switch can cut off the power supply directly counter clockwise, Listing has been received by the buyer!
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
Select at least 2 products
to compare
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR 
Lithium Battery Charging Board TP 4056 Micro USB with Protection 
shiven.k –
very good quality materials used. battery original 2200
shiven.k –
omkar –
really very long backup. almost 24hrs
omkar –