DC-DC 5A Buck Converter XL4015 Adjustable Supply
Out of stock
The DC-DC Adjustable Step-Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. this DC-DC 5A Buck Converter uses a connection terminal for easy wiring. The output voltage is adjustable from 1.25 to 35 V from an input of 4 to 38 V. Note that the input voltage must be at least 1.5 V higher than the required output voltage.
₹289.10 Price Including GST
Out of stock
CompareDC-DC 5A Buck Converter 75W XL4015 Adjustable Supply
DC-DC 5A Buck ConverterFeatures:
Module Properties: 5A High Power 75W DC-DC adjustable step-down module
Input voltage: DC 4.0 ~ 38V
Output voltage: DC 1.25V ~ 36V continuously adjustable ( the input voltage must be higher than the output voltage 1.5V )
Output current: max 5A, recommended for use in the 4.5A.
Output power: up to 75W, more than 50W, Please enhance heat dissipation
Voltmeter error: ± 0.05V
Measure range: 0 ~ 40V ( please ensure that the input voltage is 4.5V or more)
Conversion efficiency: up to 96%
Load regulation: S (I) ≤ 0.8%
Voltage Regulation: S (u) ≤ 0.8%
With overheat protection and short circuit protection
DC-DC 5A Buck Converter Dimensions: 6.6 * 3.9 * 1.8cm
Based on 0 reviews
Be the first to review “DC-DC 5A Buck Converter XL4015 Adjustable Supply”
You may also like…
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064
Related products
-
Circuits Boards & PCB, IoT & Wireless, Power Supply
Battery Shield For WeMos D1 mini battery Charging and Boost
Circuits Boards & PCB, IoT & Wireless, Power SupplyBattery Shield For WeMos D1 mini battery Charging and Boost
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
SKU: CE-M086
There are no reviews yet.