IR Line Following Sensor Module- TCRT 5000 4 Pin
17 in stock
It Adopts TCRT5000 photoelectric sensor and comparator which is easy to use with good stability and anti-interference ability. Perfect for black & white line detection for smart car. Black line for low level output and white line for high level output. The Operating Voltage is 5V. Tested range of 2cms-9cms.
₹76.70 Price Including GST
17 in stock
CompareIR Line Following Sensor Module- TCRT 5000 4 Pin
IR Line Following Sensor QUICK OVERVIEW
Operating Voltage: 3.5V-5V
Supply Current: 15mA
Optimal Sensing Distance: 3mm
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
Features :
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Onboard signal output instructions, the output is the highly effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection & middot
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
Using the TCRT5000 infrared reflection sensor
Output form: digital switch output (0 and 1)
A fixed bolt hole, convenient installation.
Based on 0 reviews
Be the first to review “IR Line Following Sensor Module- TCRT 5000 4 Pin”
You may also like…
-
Developments Boards, Motor Drives & controllers
MG995 Servo Motor Metal Gear High Quality
TowerPro MG995 Metal Gear Servo Motor is a high-speed standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.This is the most famous servo made by TowerPro . MG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars and many RC model
SKU: CE-R004 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001
Related products
-
IoT & Wireless, Modules & Sensors
NRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
IoT & Wireless, Modules & SensorsNRF24L01 with antenna V5.0 + PA + LNA wireless Module 1000 meters Long Range
The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!
This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.
SKU: CE-W005 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits
2-Channel 5V Relay Module With optocoupler For arduino & other
Circuits Boards & PCB, Developments Boards, Modules & Sensors, Robots & Kits2-Channel 5V Relay Module With optocoupler For arduino & other
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
SKU: CE-M051 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Joystick Module Dual Axis XY for arduino & other
Circuits Boards & PCB, Developments Boards, Modules & SensorsJoystick Module Dual Axis XY for arduino & other
This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
SKU: CE-M096 -
Modules & Sensors
Barometric Pressure Sensor BMP180 Digital Board Module
BMP180 Digital Barometric Pressure Sensor Board Module Arduino Compatible Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high resolution noise.The device will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.SKU: CE-M037
There are no reviews yet.