Servo Tester PPM GENERATOR Module
Out of stock
A smart little servo tester than can be used to test servo motor, ESC and also to determine motor direction. Tests up to 3 servos at the same time.
The device also can be used as a signal generator for electric speed controller (ESC), for testing your motor system without using a transmitter and receiver.
₹123.90 Price Including GST
Out of stock
CompareServo Tester PPM GENERATOR Module
A smart little servo tester than can be used to test servo motor, ESC and also to determine motor direction. Tests up to 3 servos at the same time.
The device also can be used as a signal generator for electric speed controller (ESC), for testing your motor system without using a transmitter and receiver.
It has 3 Operation Modes:
Automatic mode:- Operates servos to their endpoint and back “window wiper” mode: Make the servo swing like window wipers in the biggest angle
Manual mode:- Turn the knob with different speed, check the reaction time
Neutral / Center mode:- Centers servos to their neutral position Ideal for when setting servos up in a model
Specifications:
Input: DC 4.8 to 6.0V
Output signal: 1.5ms±0.5ms
Size: 36.5 x 31.0 x 22mm
Based on 0 reviews
Be the first to review “Servo Tester PPM GENERATOR Module”
You may also like…
-
Motor Drives & controllers
SG90 9g Mini Servo 1.2kgCm – 180 degree Rotation
The SG90 mini servo is lightweight, It is standard Quality and lightning-fast servo, designed to work with almost all the radio control systems. It is with excellent performance and high torque of 1.5kg cm gives you the freedom to use it for a variety of projects. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.
SKU: CE-R001
Related products
-
Modules & Sensors, Motor Drives & controllers
L293D Motor Driver Shield for Arduino
This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.
The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.
SKU: CE-M0172 -
Circuits Boards & PCB, Motor Drives & controllers, Robots & Kits
8 mm Coin Flat Micro Vibrator Motor
Phone vibration motor is a DC brush motor for achieving the phone’s vibration feature, when you receive a text message or phone, the motor starts to drive high-speed rotating eccentric done, resulting in vibration. Specification： Type: 0834 Material: iron Size: 8*3.4mm，wire 15mm(L) Rated voltage : 3.0 VDC Rated current: 70mA Max Rated rotor speed: 12000±2500RPM Min Operating environment: -20℃～+60℃ Save environment::-30℃～+70℃ For: Mobile phones, Pager,Electronic vibration equipment Small size meets the needs of an increasingly mobile thin fuselage. Package includes: 1 PC Coin Flat Vibrating Micro Motor DC 3V 8mm For Pager and Cell Phone Mobile
SKU: CE-M072 -
Modules & Sensors, Motor Drives & controllers
PWM dc 6v 12v 24v 28v 3a motor speed controller
This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse– Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load.
SKU: CE-M046 -
Motor Drives & controllers, Toys , RC Plane & Drone
30A ESC Brushless BLDC Motor Speed Controller
30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. 30A BLDC ESC ELECTRONIC SPEED CONTROLLER can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo (make sure motor doesn’t draw more than 30A). This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv).
SKU: CE-M0132
There are no reviews yet.