3 in stock
Low Noise And Robust. A Good Motor For Hand-Made, School Project, Model And Anything Else You Want. Its Auto swing features CW/CCW.Run direct 220V AC.
₹116.82 Price Including GST
3 in stock
CompareScrew Hole Diameter : 4.5mm/0.2 Shaft Size : 7 x 15mm/ 0.3 x 0.6 (D*L) Approximate
Package includes: 1 x Synchronous Motor
Body Size : 49 x 21mm (2mm+-)/1.9 x 0.8 (D*H) Cable Length : 29cm/11.4
Body, Wire Any color pack of 1 Motor 220V AC direct Oparated Rated power:4W
Rated speed: 5-6RPM
Manner of working:CCW/CW Metal body high grade build quality
This is an XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at the very low cost.It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.It features a 1M probe made up of stainless steel material which makes is waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHM452 Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Module DC 12V LED Digital Display Dual
Style: Embedded, XH-M452, , Display Type: Digital, Max Measuring Temperature: 100°C – 119°C, Display Size: 1.9 Inches & Under, Theory: Temperature Controller, Power Type: please checinstruction, Usage: please checinstruction,
This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.
The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.
30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. 30A BLDC ESC ELECTRONIC SPEED CONTROLLER can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo (make sure motor doesn’t draw more than 30A). This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv).
Phone vibration motor is a DC brush motor for achieving the phone’s vibration feature, when you receive a text message or phone, the motor starts to drive high-speed rotating eccentric done, resulting in vibration. Specification： Type: 0834 Material: iron Size: 8*3.4mm，wire 15mm(L) Rated voltage : 3.0 VDC Rated current: 70mA Max Rated rotor speed: 12000±2500RPM Min Operating environment: -20℃～+60℃ Save environment::-30℃～+70℃ For: Mobile phones, Pager,Electronic vibration equipment Small size meets the needs of an increasingly mobile thin fuselage. Package includes: 1 PC Coin Flat Vibrating Micro Motor DC 3V 8mm For Pager and Cell Phone Mobile
Select at least 2 products
to compare
Li-Ion 18650 Rechargeable Battery 1800MAH 
PVC Sleeve 73 mm Black Heat Shrink Tube 1M 
PVC Heat Shrink Sleeve 33mm For Battery Pack 1M 
DC 12V Motor 775 High RPM Torque With Bearing 
There are no reviews yet.