Developments Boards, Modules & Sensors
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR
Availability:
61 in stock
Product Description:
Infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products.
₹88.50 Price Including GST
61 in stock
CompareQUICK VIEW
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Specifications and Features :
- Color: Green, Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S
Based on 0 reviews
Be the first to review “HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR”
Related products
-
Developments Boards, Modules & Sensors
USB To TTL Converter RS232 CH340G Module Adapter
The CH340 series of chips are a full-speed USB device that emulates a standard serial interface, with speeds from 50bps to 2Mpbs.The chip supports 5V and 3.3V, selectable via a jumper (included).You can easily use it for serial communication to your MCUs (Arduinos,RPis,etc).Each Board is tested by our experts at Nexgen Gadgets before dispatching to ensure reliable & flawless working.
SKU: CE-M016 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
FT232RL FTDI USB to TTL Serial Adapter Module
Circuits Boards & PCB, Developments Boards, Modules & SensorsFT232RL FTDI USB to TTL Serial Adapter Module
Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
SKU: CE-M070 -
Developments Boards
ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
- internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!
- interface definition on the shell directly tagging, be clear at a glance, convenient and practical!
- 5 V, 3.3 V available at the same time, convenient for you to link the 5 V and 3.3 V target board
- shell characters using laser laser, laser engraving, never fade off! Permanent clear!
- internal motherboard with 500 ma self recovery fuse, completely protect your expensive computer motherboard!
- The LED indicator light, convenient you always observes the working state of the ST cc-link V2!
- Distribution 4 with dupont line, let you can easily cope with different target plate line order!
- Use anti-static bag packaging, automatic sealing machine sealed packaging, safe and reliable, does not fear the electrostatic, not afraid of water!
SKU: CE-P001
There are no reviews yet.