2200uf / 25v Electrolytic Capacitor Good Quality Through Hole Subtotal: ₹10.62 (incl. tax)
Batteries & Chargers
Showing 121–135 of 136 results
-
Batteries & Chargers, Circuits Boards & PCB, Power Supply
DC Buck Converter 5V3A USB Output Module
- – The max output current 3A, long time use 2.1A, enough use
- – New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
- – Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
- – Flat copper inductor, improve conversion efficiency
- – With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
- – Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
- – High quality USB port
- – Output voltage indicator (RED)
- – Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
- – Input with reverse polarity protection diode, will not damage when input connect incorrect
- – Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable
SKU: CE-M011 -
Batteries & Chargers, Circuits Boards & PCB, LED & Lights
DC LED Tube Light For Emergency 5 Watt 5V/ Car / Tent / Regular Use
Batteries & Chargers, Circuits Boards & PCB, LED & LightsDC LED Tube Light For Emergency 5 Watt 5V/ Car / Tent / Regular Use
5V dc 5watt 5 inches LED tube Light. Working on DC volt. Best use as an emergency light. SMD used SMD. Ultra-bright white. You can directly run through your existing mobile power bank. Build it high quality LED driver. support any USB port
SKU: CE-20-00050 -
Batteries & Chargers, Power Supply
Fast Quick Charger QC3.0 DC-DC Step Down Buck Converter
DC-DC Step Down Buck Converter Charging Module USB 6-32V 9V 12V 24V to QC3.0 QC2.0 Fast Quick Charger 3V 5V 12V Circuit Board.Support fast charging protocol for BC1.2, iPhone, Samsung agreementfor Qualcomm QC2.O and QC3.O
SKU: CE-M091 -
Batteries & Chargers, Circuits Boards & PCB
Lipo Battery Low Voltage Tester 1S-8S Buzzer
The LiPo low voltage Tester cum Alarm is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will go off with flashing LED if the voltage on any of the individual cells drops below the adjustable threshold. Essential while working with any Lithium Polymer battery.
SKU: CE-M071 -
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCB, Power Supply
Lithium Battery Charging Board TP 4056 Micro USB with Protection
Batteries & Chargers, Battery holder & Box, Circuits Boards & PCB, Power SupplyLithium Battery Charging Board TP 4056 Micro USB with Protection
This tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that don’t have their own protection circuit.Based around the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.Futhermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
For Bulk Quantity Please call US:- +91 9830150448
SKU: CE-M029 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
LM 2596 DC Buck Converter Module
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested. Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off. Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it. Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.
SKU: CE-M064 -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyMT3608 2A Max DC-DC Step Up Power Module Booster Power Module
MT3608 2A Max DC-DC Step Up Power Module Booster
Specifications:
2V to 24V input voltage with output boost 5V to 28V adjustable
Maximum output current: 2A
Input voltage: 2V ~ 24V
Maximum output voltage: > 5V – 28V
Efficiency: > 93%
Input voltage should not exceed the maximum input voltage
Peak current output current should not more than 2A
Output voltage should always be higher than Input voltage
PCB Size: 36 mm * 17 mm * 14 mm
SKU: CE-M026 -
Batteries & Chargers, Circuits Boards & PCB
TP4056 Micro USB 1A 18650 Lithium Battery Charger Module
The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module has on-board Micro USB interface. With Micro-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
SKU: CE-M029-W -
Batteries & Chargers, Circuits Boards & PCB, Power Supply
USB Charger DC-DC PFM Control 0.9-5V Boost module
Batteries & Chargers, Circuits Boards & PCB, Power SupplyUSB Charger DC-DC PFM Control 0.9-5V Boost module
Mini PFM Control.On-board input voltage indicator.High conversion efficiency, maximum to 96%.Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable,
with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MA On-board USB female, can supply power directly to the USB interfaceSKU: CE-M020
