- You cannot add "HC-06 Bluetooth serial pass-through module" to the cart because the product is out of stock.
CP2102 USB to TTL USB UART converter module 6 Pin
100 in stock
Provides connection from USB on host computer to microcomputers or other TTL signal level accessories. The CP2102 Virtual COM Port (VCP) device drivers allow a CP2102-based device to appear to the PC’s application software as a COM port. Application software running on the PC accesses the CP2102-based device as it would access a standard hardware COM port
₹206.50 Price Including GST
100 in stock
CompareCP2102 USB to TTL USB UART converter module 6 Pin
Tthe main chip CP2102, generate virtual serial port after installing the driver, Taking power, USB and elicit interface includes 3.3 V (< 40 ma), 5 V, GND, TX and RX, signal feet is 3.3 V, is logical
Send and receive, onboard status indicator lights, lights, right after install the driver state will Chang Liang lights, transceiver indicator light will flash when communication, the lower the baud rate, the higher brightness
Support from 300 BPS baud rate between ~ 1 MBPS
Communication format support:
- 5,6,7,8 bits of data;
- support 1,1.5, 2 stop bits.
- odd, even, mark, space, none
PIN OUT
DTR , RXD, TXD, +5V ,GND, 3V3
support operating system: Windows vista/xp/server 2003/2000, Mac OS X/OS ,Linux
The USB head for head, can be directly connected to computer USB port
SMD components for SMT process, the quality stable
Based on 0 reviews
Be the first to review “CP2102 USB to TTL USB UART converter module 6 Pin”
You may also like…
-
Developments Boards, Modules & Sensors
USB To TTL Converter RS232 CH340G Module Adapter
The CH340 series of chips are a full-speed USB device that emulates a standard serial interface, with speeds from 50bps to 2Mpbs.The chip supports 5V and 3.3V, selectable via a jumper (included).You can easily use it for serial communication to your MCUs (Arduinos,RPis,etc).Each Board is tested by our experts at Nexgen Gadgets before dispatching to ensure reliable & flawless working.
SKU: CE-M016 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
FT232RL FTDI USB to TTL Serial Adapter Module
Circuits Boards & PCB, Developments Boards, Modules & SensorsFT232RL FTDI USB to TTL Serial Adapter Module
Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
SKU: CE-M070
Related products
-
Developments Boards, Modules & Sensors
USB ASP ISP Programmer for 8051
USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed, and thats make it low cost USB programmer.
The Programmer works on USB port and can be used with Laptops. Software is compatible with Windows Vista and Windows 7. High speed programming and does’t require external power.
SKU: CE-P002 -
Developments Boards, Modules & Sensors
TTP226 8-way touch module Capacitive touch switch digital touch sensor
Developments Boards, Modules & SensorsTTP226 8-way touch module Capacitive touch switch digital touch sensor
TTP226 8-Way Capacitive Touch Sensor / Switch Module is based on a touch-sensing IC enabling capacitive touch switch mode. In the normal state, the module output is low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
SKU: CE-M055 -
There are no reviews yet.