A4988 driver 3D Printer Module Stepper Motor Driver + heat sink Subtotal: ₹112.10 (incl. VAT)
Motor Drives & controllers, Robots & Kits
Dual Shaft BO Motor-Straight 300 RPM
Availability:
179 in stock
Dual shaft DC motor with gear box which gives good torque and rpm at lower voltages. This motor can run at approximately 200rpm when driven by a Dual Li-Ion cell battery at 6 V and approximately at 300 rpm when driven by a 9V Li-Ion cell.It is most suitable for light weight robot running on small voltage. Out of its two shafts one shaft can be connected to wheel, other can be connected to the position encoder.
₹63.72 Price Including GST
179 in stock
CompareDual Shaft BO Motor-Straight 300 RPM
Dual Shaft BO Motor overview-
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Double D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 300 RPM
Rated Torque: 0.35 Kgcm
Based on 0 reviews
Be the first to review “Dual Shaft BO Motor-Straight 300 RPM”
You may also like…
-
Developments Boards, Motor Drives & controllers
MG995 Servo Motor Metal Gear High Quality
TowerPro MG995 Metal Gear Servo Motor is a high-speed standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.This is the most famous servo made by TowerPro . MG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars and many RC model
SKU: CE-R004 -
Motor Drives & controllers
SG90 9g Mini Servo 1.2kgCm – 180 degree Rotation
The SG90 mini servo is lightweight, It is standard Quality and lightning-fast servo, designed to work with almost all the radio control systems. It is with excellent performance and high torque of 1.5kg cm gives you the freedom to use it for a variety of projects. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.
SKU: CE-R001 -
Motor Drives & controllers, Robots & Kits
Geared Motor DC , 12V, Center Shift 10- 500 RPM
DC Motor – 10 to 500 RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
10 to 500 RPM 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
SKU: CE-GM
Related products
-
Robots & Kits
Digispark ATTiny85 USB Development Board Digistump
- 100% Brand New and High Build Quality
- The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.
- The Digispark is shipped fully assembled except for the two included and easy to solder headers.
SKU: CE-D003 -
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & Kits
HC-06 Bluetooth serial pass-through module
Developments Boards, IoT & Wireless, Modules & Sensors, Robots & KitsHC-06 Bluetooth serial pass-through module
This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.0+EDR standard. In Bluetooth 2.0, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth. This module is set with serial interface, which is easy to use and simplifies the overall design/development cycle.
SKU: CE-M048 -
Developments Boards, Modules & Sensors, Robots & Kits
APDS-9930 Non-contact proximity and Ambient Light sensor
Developments Boards, Modules & Sensors, Robots & KitsAPDS-9930 Non-contact proximity and Ambient Light sensor
APDS-9930 is a digital I2C compatible interface ambient light sensor (ALS) and proximity sensor with IR LED in a single 8-pin package. The ambient light sensor utilizes dual photodiodes to approximate the human eye response with a low lux performance at 0.01 lux. This high sensitivity allows for the device to operate behind a darkened glass. The proximity sensor is fully calibrated to detection of objects to 100 mm thus eliminating the need for factory calibration of the end equipment or sub-assembly. The proximity detection feature operates well from bright sunlight to dark rooms. The addition of the micro-optics lenses within the module, provide highly efficient transmission and reception of infrared energy which lowers overall power dissipation. In addition, an internal state machine provides the ability to put the device into a low power mode in between ALS and proximity measurements providing very low average power consumption.
SKU: CE-M088 -
Motor Drives & controllers, Robots & Kits
Geared Motor DC , 12V, Center Shift 100 RPM
DC Motor – 100 RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
100 RPM 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
SKU: CE-GM-10-R-1-1
There are no reviews yet.