-
×
Rotary Encoder Module Brick Sensor arduino KY-040
1 × ₹116.82
Subtotal: ₹116.82 (incl. tax)
Developments Boards, Modules & Sensors
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR
Availability:
64 in stock
Product Description:
Infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products.
₹88.50 Price Including GST
64 in stock
CompareQUICK VIEW
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Specifications and Features :
- Color: Green, Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: (High/ Low-level Signal) 3.3V TTL output
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S
Based on 0 reviews
Be the first to review “HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR”
Related products
-
Developments Boards, Modules & Sensors
16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
Developments Boards, Modules & Sensors16 Key 4 x 4 Membrane Switch Keypad 4×4 4*4 Matrix Array Matrix keyboard
• 8 pin connector
• Adhesive mounting
• Maximum Circuit Rating: 35VDC, 100mA
• Insulation Resistance: 100M Omh, 100V
• Dielectric Withstand: 250VRms (50-60Hz, 1min)
• Contact Bounce: <=5ms
• Life Expectancy: 1 million closures
• Operation Temperature: 0 to 70 centigrade
• Humidity: 40 centigrade, 90%-95%, 240 hours
• Pad Size (L x W): Approx. 3 x 2.7 inch / 76 x 69 mm
• Flexible Circuit Length: Approx. 3.3 inch / 83 mmSKU: CE-M032 -
Developments Boards, Modules & Sensors
TTP223 CAPACITIVE TOUCH MODULE
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption. When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Job type: the initial state is low, high touch, do not touch is low ( similar touch of a button feature ). A module can be installed in such as surface plastic, the glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons.
SKU: CE-M0106 -
Circuits Boards & PCB, Developments Boards, Modules & Sensors
Flame Sensor Or Fire Ignition Sensor Module 4 pin
Circuits Boards & PCB, Developments Boards, Modules & SensorsFlame Sensor Or Fire Ignition Sensor Module 4 pin
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: CE-M001 -
Developments Boards, Modules & Sensors, Robots & Kits
ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
Developments Boards, Modules & Sensors, Robots & KitsADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor
ADXL345 Tripple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. calcuttaelectronics.com
The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
SKU: CE-M062
There are no reviews yet.