74 in stock
Heat-shrink tubing (or, commonly, heat shrink or heatshrink) is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. It can also be used to repair the insulation on wires or to bundle them together, to protect wires or small parts from minor abrasion, and to create cable entry seals, offering environmental sealing protection. Heat-shrink tubing is ordinarily made of polyolefin, which shrinks radially (but not longitudinally) when heated, to between one-half and one-sixth of its diameter.
Price range: ₹5.90 through ₹41.30 Price Including GST
CompareHeat Shrink Tube assorted Size 1 Meter
Material: Polyolefin Fully shrunk internal Shrinkage Ratio: 2 : 1(will maximum shrink to 1/2 of its supplied diameter) Minimum Shrinkage Temp: +70°C Full Shrinkage Temp: +120°C maximum Operating Temperature: -45°C to +125°C Tensile strength: 10.4 Mpa Dielectric strength: 15 kV/mm Flammability: Flame Retardant Cutting method: Scissors or sharp knife Manufacture specification: ISO9001 Approvals: UL Approved Package included: 1 Piece Black heat shrink sleeve 1.Flexible 2.Zero halogen 3.Flame retardant 4.Low smoke generation if burning 5.Continuous Operating Temperature:-45?to125? 6.Shrink Temperature:120
One of the best ways to seal your battery is by using heat shrink. It can protect your battery from short circuits, seal your battery against the weather and add a professional look to your DIY battery.PVC heat shrink is great for battery use, but it can sometimes become brittle over time and begin to crack at the edges or at sharp corners. One method around this is to use multiple layers. This strengthens the heat shrink and adds a second line of defense if one layer should begin to crack. It also allows you to use multiple pieces of heat shrink perpendicular to each other to cover all six sides of a battery instead of just four sides, thus completely sealing your battery. Adding a thin layer of foam around your battery can also help prevent cracking of the heat shrink over time.
The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module has on-board Micro USB interface. With Micro-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf (some sellers are less did not even 100uf capacitance) 1.6mm glass sheet, the real amplifier board did the most detailed, high-fidelity sound output 3W + 3W, is a rare good product enthusiasts amplifier, potentiometer using original anti-meter body, life expectancy up to 15 years, potentiometer with switch can cut off the power supply directly counter clockwise, Listing has been received by the buyer!
Select at least 2 products
to compare
FT232RL FTDI USB to TTL Serial Adapter Module 
Battery Pack 6.4v 6000 Mah LIFEPO4 Rechargable For Solar 
M7 1N4007 SMD 1A 1000V IN4007 Rectifier Diode 
DC Buck Converter 5V3A USB Output Module 
Suman Dey (verified owner) –
Nice product
Suman Dey –