Water Pump DC 12 V 8 Watt
Water Pump DC 12V
8 Watt Power
Flow- 10L/ min
H-Max-5m
Outlet Diameter- 10mm
Body ABS Plastic
Power Lead 12 inch It can be increase
USB To TTL Converter RS232 CH340G Module Adapter
2 × ₹82.60
HC SR501 INFRARED IR PIR MOTION SENSOR for Arduino AVR
2 × ₹88.50
FT232RL FTDI USB to TTL Serial Adapter Module
3 × ₹265.50
2-Channel 5V Relay Module With optocoupler For arduino & other
1 × ₹88.50
Sound Detection sensor Module For Arduino & other
1 × ₹76.70
Flame Sensor Or Fire Ignition Sensor Module 4 pin
1 × ₹116.82
Rotary Encoder Module Brick Sensor arduino KY-040
1 × ₹116.82 Subtotal: ₹1,537.54 (incl. tax)
5 in stock
Water Pump DC 12 V 8 Watt High Quality. Very Useful for Small Project, Water Fountain, Home Decoration, Gardening Etc. Easy to install Can run Only DC 12V supply
₹448.00 ₹616.00 Price Including GST
5 in stock
CompareWater Pump DC 12V
8 Watt Power
Flow- 10L/ min
H-Max-5m
Outlet Diameter- 10mm
Body ABS Plastic
Power Lead 12 inch It can be increase

This tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that don’t have their own protection circuit.Based around the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.Futhermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
For Bulk Quantity Please call US:- +91 9830150448


This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.

Brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD or TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch: 2.54mm Module size: 36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module.
Select at least 2 products
to compare



There are no reviews yet.